User manual

Display
R&S
®
RTO
114User Manual 1316.0827.02 ─ 06
SCPI command:
WAVeform<m>:XYCurve:STATe on page 509
X-source
Defines the signal source that supplies the x-values of the XY-diagram. Select one of the
following:
●
One of the waveforms of any channel
●
A reference waveform
●
The results of a mathematical function
SCPI command:
WAVeform<m>:XYCurve:XSOurce on page 510
Y-source
Defines the source to be used as the y-axis of the XY-diagram. Select one of the following:
●
One of the waveforms of any channel
●
A reference waveform
●
The results of a mathematical function
SCPI command:
WAVeform<m>:XYCurve:YSOurce on page 510
Constant XY-ratio
If enabled, the x- and y-axes maintain a constant ratio in the diagram.
SCPI command:
WAVeform<m>:XYCurve:RATio on page 509
Swap XY
Replaces the source of the x-axis with the source of the y-axis and vice versa.
SCPI command:
WAVeform<m>:XYCurve:SWAP on page 510
4.4 History
The history accesses the data of previous acquisitions and provides them for further
analysis.
History