User manual

Display
R&S
®
RTO
111User Manual 1316.0827.02 ─ 06
Position / Relative position
Defines the y-value of the centerpoint of the zoom area.
SCPI command:
LAYout:ZOOM:VERTical:ABSolute:POSition on page 506
LAYout:ZOOM:VERTical:RELative:POSition on page 507
SEARch:RESDiagram:VERT:ABSolute:POSition on page 638
SEARch:RESDiagram:VERT:RELative:POSition on page 639
Range / Relative Range
Defines the height of the zoom area.
SCPI command:
LAYout:ZOOM:VERTical:RELative:SPAN on page 508
LAYout:ZOOM:VERTical:ABSolute:SPAN on page 507
SEARch:RESDiagram:VERT:ABSolute:SPAN on page 638
SEARch:RESDiagram:VERT:RELative:SPAN on page 639
Full height
Uses the full diagram height for the zoom area. Only horizontal zoom settings can be
changed.
Horizontal mode
Defines whether absolute or relative values are used to specify the x-axis values.
SCPI command:
LAYout:ZOOM:HORZ:MODE on page 503
SEARch:RESDiagram:HORZ:MODE on page 637
Position / Relative position
Defines the x-value of the centerpoint of the zoom area.
SCPI command:
LAYout:ZOOM:HORZ:ABSolute:POSition on page 503
LAYout:ZOOM:HORZ:RELative:POSition on page 505
Range / Relative Range
Defines the width of the zoom area.
SCPI command:
LAYout:ZOOM:HORZ:ABSolute:SPAN on page 504
LAYout:ZOOM:HORZ:RELative:SPAN on page 505
SEARch:RESDiagram:HORZ:ABSolute:SPAN on page 636
SEARch:RESDiagram:HORZ:RELative:SPAN on page 637
4.3 XY-diagram
XY-diagrams combine the voltage levels of two waveforms in one diagram. They use the
voltage level of a second waveform as the x-axis, rather then a time base. This allows
XY-diagram