User manual

Display
R&S
®
RTO
98User Manual 1316.0827.02 ─ 06
Show crosshair
If selected, a crosshair is displayed in the diagram area. A crosshair allows you to select
a specific data point by its co-ordinates.
SCPI command:
DISPlay:DIAGram:CROSshair on page 497
Show labels
If selected, labels mark values on the x- and y-axes in specified intervals in the diagram.
SCPI command:
DISPlay:DIAGram:LABels on page 497
Show tabs always
If selected, the tab titles of all diagrams are displayed: "Diagram1", "Diagram2" ...
If cleared, the tab titles are not shown except for those in a tabbed diagram. In tabbed
diagrams, the tab titles are required to change the tabs.
SCPI command:
DISPlay:DIAGram:TITLe on page 497
Keep Y-grid fixed
If enabled, the horizontal grid lines remain in their position when the position of the curve
is changed. Only the values at the grid lines are adapted. This reflects the behavior of
traditional oscilloscopes.
SCPI command:
DISPlay:DIAGram:YFIXed on page 497
Show evaluation gate(s) in zoom
If enabled, the available histogram areas, masks, and measurement gates are shown in
the zoom diagrams. If the evaluation gate is within the zoom area, the display helps to
move or modify the evaluation gates in the zoom window.
Make sure that the option is disabled if the zoom area and the evaluation gate are of
nearly the same size to avoid conflicts in mouse operation.
Gate symbol transparency
Sets the transparency of the area that is defined as measurement or search gate. The
setting only takes effect if "Show gate" is enabled.
Search result gate symbol color
Sets the color of the search zoom area. The search zoom area is displayed if "Show
search zoom windows" is enabled. See also: "Search zoom window" on page 247.
Enable
If enabled, the signal bar is displayed in the diagram area.
The signal bar contains signal icons (mini windows) that display either real-time views of
minimized waveforms, or labels with setting information for displayed waveforms. In
addition, the timebase label and trigger label provide general information for all displayed
channels.
Display Customization