User manual

Display
R&S
®
RTO
92User Manual 1316.0827.02 ─ 06
To configure auto-hide
The signal bar can be hidden if the displayed information has not changed for a defined
time, and is displayed again automatically when a setting in the signal bar changes. The
signal bar is not hidden entirely, it simply fades and becomes less visible in the display.
1. Press the DISPLAY key on the front panel.
2. In the "Display" dialog box, select the "Diagram Layout" tab.
3. Select "Auto-hide".
4. Define the hiding properties:
● "Hide bar after": the time after which the bar is hidden if no changes occur
● "Hiding opacity": Opacity of the hidden signal bar on a scale from 30% (high
transparency) to 80% (lower transparency and better visibility)
● Hide head also: the horizontal and trigger labels are also faded
To change the colors
If you want to highlight the signal bar, you can change the "Fill color" and "Border
color" of the bar.
1. Press the DISPLAY key on the front panel.
2. In the "Display" dialog box, select the "Diagram Layout" tab.
3. Tap "Border color" to change the color of the signal bar frame, or "Fill color" to change
the fill color of the bar.
4. In the "Adjust Colors" dialog box, select the color to be used.
5. To use a color that is not yet defined, tap "Userdefined Colors" and define the new
color's settings. To see the effect of a setting change in the Preview area, enter the
value and press the ENTER key.
6. Tap "OK."
The signal bar is displayed in the new colors.
4.1.2.3 Configuring Dialog and Result Boxes
You can optimize the display of dialog and result boxes so they do not interfere with the
waveform display and you can still analyze the results and settings.
To change the font size in dialogs
1. Press SETUP.
2. In the "Screen" tab, enter the desired font size in points for all dialog box texts. Most
dialog boxes are optimized for a font size of 19 pt.
Display Customization