User manual

Display
R&S
®
RTO
91User Manual 1316.0827.02 ─ 06
2. Under "Color Table Assignment", select the tab for the waveform.
3. Enable "Use Color table".
4. Under "Assign color table", select the color table you want to assign to the waveform.
The waveform colors are displayed according to the definition in the color table.
4.1.2.2 Using the Signal bar
The signal bar can hold a large number of signal and result icons. Signal icons represent
the waveforms, serial buses and parallel buses, while result icons are minimized result
boxes showing measurement and search results.
To scroll the signal bar
If the signal bar contains more than five icons, not all icons are visible on the display.
► Touch the signal bar between the icons and move it up or down until the required
icon appears.
To switch the signal bar on and off
If you need the complete screen to see the diagrams, you can switch off the signal bar
completely.
► Tap the "Show Signal Bar" icon on the toolbar.
Alternatively, tap "Signal Bar" on the "Display" menu.
To change the position of the signal bar
► Touch the horizontal and trigger label on the top and drag the signal bar to the oppo-
site side of the screen.
Display Customization