User manual

Display
R&S
®
RTO
90User Manual 1316.0827.02 ─ 06
3. For each range of cumulative occurance of the values, insert an entry in the color
table:
● To insert an entry at the end of the color table, tap "Append".
● To insert an entry before an existing entry, tap the existing row and tap "Insert".
● To remove an entry, tap the entry, then tap "Remove".
4. Assign a color to each entry: Tap the "Color" cell and select a predefined color, or
define your own color.
Example:
In this example, values with a cumulative occurance under 25% (very short or rare dis-
play) are displayed green, whereas values with an occurance of 40% are yellow-green,
and values with an occurance of 90% (displayed almost for the entire duration of the
signal) are a deep shade of orange.
To create a new color table
1. On the "Display" menu, tap "Signal Colors".
2. To create an empty color table: tap the "Add" button and enter a name for the new
color table using the on-screen keyboard.
To copy an existing color table: select the color table you want to copy, and tap
the "Copy" button. Enter a name for the new color table using the on-screen keyboard.
To assign the color table and enable its use
1. Open the "Signal Colors/ Persistence" tab of the "Display" dialog box.
Display Customization