Specifications
XBee®/XBee‐PRO®SERFModules
©2009DigiInternational,Inc. 60
Description:
This transmission sends the string "TxData" as a broadcast transmission. Since the
destinationaddress is set to 0xFFFF, all devices, including sleeping end devices can receive this
broadcast.
Because receiver application addressing is enabled by default, the XBee will report all received
data frames in the explicit format (0x91) to indicate the source and destination endpoints, cluster
ID, and profile ID that each packet was received on. (Status messages like modem status and
route record indicators are not affected.)