User manual

Chapter Six: Layout of Controls
6.1 Manual Channel Selection
The 2 channels of the Einstein can be selected manually by
activating the selectswitch for either channel. Alternatively, a foot
switch can be connected toremotely control the channel selection.
6.2 Master 2 On/Off
Master 2 can be used for all channels, and can also be remotely
controlled via theincluded foot switch. This allows instant volume
boost, or cut, without fiddlingwith the amp. Once adjusted to suit your
needs for the gig, it’s a thing of purebeauty. You can select the Master
2 function via the Diezel 2-button foot switch.Actually, you can also
use a readily available single button foot switch with a 1/4”connector.
6.3 Channels
• Channel One
Control perimeters include Gain, Volume, Treble, Mid, and Bass. A
3-positiontoggle switch selects preset gain modes.
• Channel Two
Control perimeters include Gain, Volume, Treble, Mid, and Bass.
This channelcan be selected via the toggle switch, or via the Diezel
2-button foot switch.
6.4 Effects Mix control Rear panelThis control determines the amount of
effect signal in the parallel loop