Replacement Part List

www.B3Cfuel.com
Engineered to the
Highest Standard
Engineered to the
Highest Standard
conforming to military grade specs!
Antioxidants & Anticorrosives
new standard of
the highest standard of protection - 24 7
Introducing NEW Diesel Mechanic In A Bole
7
24
P
R
O
T
E
C
T
I
O
N
Conforms to Military Specications (Mil-Spec) for
Antioxidants and Anticorrosives...This Level of Protection
Has Never Been Available To The General Public Until
Now
Fuel Stabilization (Antioxidant Package): Conforms to military specications (Mil-T-5624P
and ASTM D 1655). DMIB controls gum and peroxide formation in all diesel fuels, stopping the
formation of oxidation and asphaltenes. This is the highest standard of protection for any diesel
fuel in storage (i.e. generators).
Anticorrosive Package: This technology prevents corrosion in fuel tanks and storage tanks
above and below the fuel with the only Diesel Vapor Corrosive Inhibitor (VCI) available. DMIB
protects all metals as tested by ASTM D130 (received an A-1 rating) and by NACE (received an
A rating).
Improved Fuel Efciency: DMIB has additive components that contain a fuel catalyst that
allows the diesel fuel to burn more efciently, therefore reducing fuel consumption. The BTU’s
are also increased resulting in improved fuel efciency and horsepower.
Smoke Opacity and Emission Reductions: Due to more efcient combustion, tests have
indicated a signicant reduction of exhaust smoke during acceleration and gear changing.
As a result, particulate lters stay cleaner longer which means longer intervals between lter
regeneration. In addition, EGR valves will have longer service life.
High Temperature Detergent: DMIB promotes better volumetric efciency allowing for
continuously clean spray patterns. This detergent guards against gum and varnish build up to
free up “sticky” injectors. DMIB restores the fuel system back to the manufacturer’s original
specications.
Pour-Point Depressant: Adding DMIB into No.2 Ultra Low Sulfur Diesel (ULSD) fuel effectively
lowered the pour-point by -18°F (from the base pour-point).
Upper Cylinder Lubricity: The new ULSD blends reduce the amount of lubricity in the fuel.
DMIB has an additive that restores lost lubrication, which signicantly improves the condition of
the cylinder liner, piston, and piston ring (as tested by ASTM D7688).
Water Protection: DMIB disperses water molecules allowing them to
pass harmlessly through the fuel system and burn during combustion.
DMIB prevents the bound water in the diesel/bio-diesel blends from settling on the bottom of the tank. This
prevents microbial growth as well as stops asphaltenes from forming sludge which plugs and damages most
lters (as tested by ASTM E1064).
Cetane Improvement: DMIB increased cetane ratings by 2 points based on ASTM D976. This increase will
assure better cold starting, reduced smoke opacity, faster warm-ups, and improve engine performance.
Protection From Biodiesel Blends: DMIB is 100% synthetic and will protect and revitalize seals and rubber
components as well as protect the fuel system.