SDS

ManualsBrandsDIESEL Mechanic In A Bottle ManualsOutdoors24 oz. Multi Purpose Fuel Stabilizer

Safety Data Sheet

Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System

Date of Revision: 07/19/2021 Revision: 05

Section 1 - Chemical Product and Company Identification

1.1 Product Name: Diesel Mechanic in a Bottle

1.2 Synonym: Blend

1.3 B3C Fuel Solutions LLC, 108 Daytona Street, Conway, SC 29526, 843-347-0482

1.4 Recommended Use: Fuel system treatment

1.5 RESTRICTIONS on USE THIS STABILIZER IS FOR DIESEL ENGINES ONLY

1.6 Emergency Response Number: INFOTRAC 800-535-5053

International Emergency Telephone Number: +1-352-323-3500

Section 2 - Hazards Identification

2.1 GHS HAZARD

Hazard Classes

Flammable liquid

Aspiration Hazard

Eye Irritation

Skin Irritation

Specific Target Organs toxicity single exposure

Specific Target Organs repeated exposure

Acute Toxicity (Oral)

Acute Toxicity (Inhalation)

Acute Toxicity (Dermal)

Carcinogenicity

Reproductive Toxicity

Mutagenicity

Toxic to aquatic life with long-lasting effects

Hazard Categories

Category 3

Category 1

Category 2A

Category 2

Category 3

Category 1

Category 4

Category 3

Category 1B

Category 2

Category 1B

Category 2

2.2 Signal Word: Danger

Page 1 of 12

Summary of content (13 pages)

PAGE 1
Safety Data Sheet Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System Date of Revision: 07/19/2021 Revision: 05 Section 1 - Chemical Product and Company Identification 1.1 Product Name: Diesel Mechanic in a Bottle 1.2 Synonym: Blend 1.3 B3C Fuel Solutions LLC, 108 Daytona Street, Conway, SC 29526, 843-347-0482 1.4 Recommended Use: Fuel system treatment 1.5 RESTRICTIONS on USE THIS STABILIZER IS FOR DIESEL ENGINES ONLY 1.
PAGE 2
Diesel Mechanic in a Bottle Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System 2.3 Pictograms: Flame Irritant Health Aquatic Hazard 2.4 Hazard Statements PHYSICAL HAZARDS: H226: Flammable liquid and vapor. HEALTH HAZARDS: H302: Harmful if swallowed. H304: May be fatal if swallowed and enter airways. H315: Causes skin irritation. H311: Toxic in contact with skin. H319: Causes serious eye irritation. H331: Toxic if inhaled.
PAGE 3
Diesel Mechanic in a Bottle Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System P280: Wear protective gloves, clothing, and eye protection RESPONSE STATEMENTS: P301 +310+ P331: IF SWALLOWED: Immediately call the National POISON CENTER at 800-2221222. DO NOT induce vomiting. P303+P361+353: IF ON SKIN, Take off immediately all contaminated clothing. Rinse skin with water. P304+340: IF INHALED. Remove to fresh air and keep comfortable for breathing.
PAGE 4
Diesel Mechanic in a Bottle Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System 3.2 Blend Contains Chemical Names 3-Oxa-1-heptanol CAS# 111-76-2 EC# 203-905-0 Classification Glycerides, mixed decanoyl and octanoyl 73398-61-5 277-452-2 2,6-Di-tert-butyl-4-methylphenol 2-Pheny propane 128-37-0 98-82-8 204-881-4 202-704-5 Petroleum naphtha 64742-95-6 265-199-0 Asp. Tox. 1 H304, Muta. 1B H340, Carc. 1B H350 Phenylmethane 108-88-3 203-625-9 Flam. Liq.
PAGE 5
Diesel Mechanic in a Bottle Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System Inhalation: Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult and IF TRAINED, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation without protection. 4.5 After first aid, get appropriate paramedic or community medical support.
PAGE 6
Page 5 of 12
PAGE 7
Diesel Mechanic in a Bottle Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System Section 8 - Exposure Controls / Personal Protection Chemical Names Blend of Hydrocarbons and modified glycol ether ACGIH- TLV OSHA - PEL 25 ppm 50 ppm 8.2 ACGIH® = American Conference of Governmental Industrial Hygienists. TLV® = Threshold Limit Value. OSHA = US Occupational Safety and Health Administration. PEL = Permissible Exposure Limits.
PAGE 8
Diesel Mechanic in a Bottle Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System 8.6 Protective Clothing Pictograms 9.1 Section 9 - Physical and Chemical Properties Water Solubility: Soluble Flash Point: 113.9°F (45.5°C) closed cup Boiling Point: Not Available Lower Explosive Limits (vol % in air): 1% Upper Explosive Limits (vol % in air): 10% Melting Point: Not Available Viscosity: 2.
PAGE 9
Diesel Mechanic in a Bottle Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System 11.1.1 OECD Guideline Test results found in the European Chemical Agency Database show that components of this product cause Oral Toxicity. 11.11.2 OECD Guideline Test results found in the European Chemical Agency Database show that components of this product be Inhalation Toxicity. 11.11.
PAGE 10
Diesel Mechanic in a Bottle Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System 12.1 Product Name Blend of Hydrocarbons and modified glycol ether Section 12 - Ecological Information Results Expected to be toxic to aquatic organisms.
PAGE 11
Diesel Mechanic in a Bottle Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System Conforms to The United Nations Regulation Globally Harmonized System Revision 7 Marking: MARINE POLLUTANT The marine pollutant mark is only applicable for packages containing more than 5 liters of liquids 14.2 Use marking when shipping as a limited quantity ground in the US DOT Transport Limited Quantity/Consumer Commodity Inner packaging not over 5.0L (1.3 gallons) net capacity each.
PAGE 12
Diesel Mechanic in a Bottle Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System 15.1 US Regulations: Section 15 - Regulatory Information TSCA: All components of this product are on the TSCA Inventory or are exempt from TSCA Inventory requirements under 40 CFR 720.30. CERCLA Hazardous Substances and corresponding RQs: Phenylmethane 1000 lbs.
PAGE 13
Diesel Mechanic in a Bottle Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System Pennsylvania: All components of this product are on the Pennsylvania Inventory or are exempt from Inventory requirements. Section 16 - Other Information 16.1 Disclaimer: The information presented in this Safety Data Sheet is based on data believed to be accurate as of the date this Safety Data Sheet was prepared.