SDS

Diesel Mechanic in a Bottle
Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System
Conforms to The United Nations Regulation Globally Harmonized System Revision 7
Page 5 of 12
Inhalation: Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing
is difficult and IF TRAINED, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation without
protection.
4.5 After first aid, get appropriate paramedic, or community medical support. The severity of outcome
following an exposure may be more related to the time between the exposure and treatment, rather than the
amount of the exposure. Therefore, there is a need for rapid treatment of any exposure.
4.6 Note to Physicians: If you determine that a medical emergency exists, and the specific chemical identity is
necessary for emergency or first-aid treatment we will immediately disclose the specific chemical identity. Call
CHEMTREC 800-424-9300 or 703-527-3887. We will require a written statement of need and confidentiality
agreement, in accordance with OSHA’s Trade Secret Regulations as soon as circumstances permit. In non-
emergency situations, we will upon written request disclose a specific chemical identity
Section 5 - Fire-Fighting Measures
5.1 General Fire Hazards: Use water to cool containers exposed to fire.
5.2 Hazardous Combustion Products: Avoid fumes of burning product.
5.3 Extinguishing Media: Carbon dioxide, dry chemical, foam.
5.4 Fire Fighting Equipment/Instructions: Fire fighters should wear full-face, self-contained breathing
apparatus and impervious protective clothing. Fire fighters should avoid inhaling any combustion products.
Section 6 - Accidental Release Measures
6.1 Spill /Leak Procedures: Ventilate area. Wear adequate protective equipment. Spillages of liquid product
will create a fire hazard and may form an explosive atmosphere. Keep all sources of ignition away from the spill.
6.2 Spills: Avoid direct contact with material. Stop leak if without risk. Move containers from spill area. Prevent
entry into sewers or waterways. Contain and collect spillage with non-combustible, absorbent material such as
sand, earth, vermiculite or diatomaceous earth and place in a container for disposal.
Section 7 - Handling and Storage
7.1 Handling Precautions: Keep away from ignition sources such as heat, sparks, and open flames NO
SMOKING Take precautionary measures against static discharge. Non-sparking tools should be used. Wear
protective gloves, clothing and eye protection. Wash thoroughly after handling. Use good personal hygiene
practices and wear appropriate personal protective equipment. Empty containers retain residue and may be
dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame,
sparks, or other sources of ignition. They may explode and cause injury or death.
7.2 Storage Requirements: Store in original manufacture container tightly closed container in a cool, dry, and
well-ventilated area.
7.3 Chemical Incompatibilities: Strong oxidizing agents and strong reducing agents.