Specifications

86
6.8.3 Handling the basket
 WARNING
Before handling the basket, you must check
that the control enabling switch is set to “1”
and the engine is turned on.
Use the basket controls and move the machine arm.
To carry out the movements, turn the knob corresponding to
the movement desired (Fig. 28-G0000):
Retract the boom:
- Turn the knob A1
Remove the boom:
- Turn the knob A2
Lift the boom:
- Turn the knob B1
Lower the boom:
- Turn the knob B2
After the operation has been completed, release the knob,
that will return to idle position.
The basket moving speed is of 0.4 m/s.
During the regular use of the basket, the green pilot light of
the work area (Fig. 28-G0000, pos. C) remains steadily lit.
 DANGER
If the work area pilot light turns o , all the
movement considered dangerous for machine
stability will be blocked. Only boom retraction
and lifting will remain active in order to allow
the basket to come back into the foreseen
work area.
6.8.4 Using the basket services *
The basket may be provided with optional
services such as extension or rotation.
To carry out the movements, turn the service knob (Fig. 28-
G0000, pos D), corresponding to the movement desired.
The movement or action changes according to the type of
option provided on the basket and the position of the lever
located on the basket.
28- G0000
A1 B1
B2C A2
D