Specifications

83
6.7.4 Turret rotation *
* Function active only for baskets mounted on Pegasus
machines.
To carry out movements, you must operate two controls: turn
the turret rotation knob (Fig. 23-G0000, pos. A) and enable
the movement simultaneosuly, using the joystick (Fig. 23-
G0000, pos. C).
The basket moving speed during turret rotation is of 0.7 m/s.
6.7.5 Using the basket services *
The basket may be provided with optional
services such as extension or rotation.
To carry out movements, you must operate two controls:
rotate the service knob (Fig. 23-G0000, pos B) and operate
simultaneously the movement using the joystick (Fig. 23-
G0000, pos C).
The movement or action changes according to the type of
option provided on the basket and the position of the lever
located on the basket.
6.7.6 Engine acceleration and acoustic signals
By pressing the horn/accelerator button (Fig. 24-G0000) the
horn for acoustic signalling will be enabled.
The same push-button can be used for accelerating/
decelerating machine’s engine, by bringing it from 900 rpm
to 1200 rpm and vice versa (from 900 rpm to 1400 rpm for
Pegasus models)
- By pressing the push-button with the engine set to the
minimum number of revolutions, the engine will be
brought to a high number of revolutions
- By pressing the push-button with the engine set to the
maximum number of revolutions, the engine will be
brought to a lower number of revolutions.
These two functions take place simultaneously when the
push-button is pressed.
24- G0000
23- G0000
BA
C