Specifications

82
6.7.3 Handling the basket
 WARNING
Before handling the basket, you must check
that the control enabling switch is set to “1”
and the engine is turned on.
Use the basket controls and move the machine arm.
To carry out movements, you must operate two controls:
rotate the knob corresponding to the desired movement
(Fig. 22-G0000, pos A and B) and operate simultaneously the
movement using the joystick (Fig. 22-G0000, pos C).
After the operation has been completed, release the knob,
that will return to idle position.
The basket moving speed is of 0.4 m/s.
During the regular use of the basket, the green pilot light of
the work area (Fig. 22-G0000, pos.4) remains steadily lit.
 DANGER
If the work area pilot light turns o , all the
movement considered dangerous for machine
stability will be blocked. Only boom retraction
and lifting will remain active in order to allow
the basket to come back into the foreseen
work area.
Lift the boom:
- Turn the knob A
- Keep the knob rotated and move the joystick downwards
Lower the boom:
- Turn the knob A
- Keep the knob rotated and move the joystick upwards
Remove the boom:
- Turn the knob B
- Keep the knob rotated and move the joystick downwards
Retract the boom:
- Turn the knob B
- Keep the knob rotated and move the joystick upwards
 ATTENTION
If the knob is not rotated, the joystick does not
carry out any movement.
22- G0000
A B
C
D