Specifications

69
5.6 Capacity diagrams
The Safe Working Load (SWL) of these vehicles depends on the extension and angle of the boom.
The capacity diagrams indicate the maximum height and extension admitted with given equipment and loads to be able to work
in safe conditions, without risk of the vehicle overturning during work operations.
This vehicle is equipped with an anti-tipping device that controls the state of the load and the risk of the vehicle overturning, in
real time (see “Anti-tipping device” chapter). However, it is necessary to use and respect the capacity diagrams in relation to the
load and type of used accessory.
 ATTENTION
It is compulsory to have the capacity diagram of the equipment and the vehicle being used, inside the cab.
Consult the correct capacity diagram before moving a load.
 PROHIBITED
Do not lift or extend the boom when the vehicle is in motion. Lower and completely retract the boom before
moving a load.
 ATTENTION
The load diagram refers to the vehicle being still and levelled.
 WARNING
Consult the “Safe work procedure” chapter before moving a load.
 ATTENTION
It is compulsory to know the weight of the load to be moved.
 ATTENTION
Locate the centre of gravity of the load to be moved. The centre of gravity may not be in the centre of the load.