Specifications

43
 ATTENTION
Should the vehicle be destined for use in particularly severe conditions (for example in dusty environments or
worksites, on argillaceous or muddy terrain), we advise consulting your nearest dealer for speci c instructions.
Failure to observe these instructions may result in the vehicle’s guarantee being voided.
 ATTENTION
Improper, incorrect, or irrational use of the vehicle or the accessories with which it is equipped as well as
modi cation to its physical structure or functioning is prohibited. A di erent use is strictly prohibited and
relieves DIECI S.R.L. from responsibility for damage caused to persons, things or animals.
 WARNING
DIECI S.R.L. is not liable for damage caused by negligent use of this vehicle or the accessory even if said
damage is not a result of intentional improper use. Everything possible has been done during the design and
construction phases of vehicles and accessories to make your job as safe as possible. Due caution, however, is
indispensable and there is no better rule to prevent accidents.
 ATTENTION
DIECI S.R.L. is not liable for damage resulting from operations performed instinctively, as a re ex, while in a
state of panic, or in the event of malfunctioning, accidents or anomaly, during use of the vehicle.
The instructions for use, maintenance and repair described in this handbook must be followed if the vehicle is to be considered as
being operated in accordance with the manufacturer’s intended uses.
 ATTENTION
DIECI S.R.L. reserves the right to carry out possible modi cations to the vehicle or accessories for technical or
commercial reasons without prior notice.
 ATTENTION
To correctly use the components and machine controls recalled in the following pages, refer to the speci c
use and maintenance manual of the machine.
 ATTENTION
Do not modify the structure or adjust the safety devices of the various tool components.
 ATTENTION
Only CE equipment certi ed by the relative manufacturer and approved can be used on DIECI machines o that
falling within the technical limits set out by DIECI S.R.L..
The interchangeable equipment manufacturer must guarantee that the combination of such equipment and
the basic machine on which the equipment is intended for, meets all the basic health and safety requirements,
providing an adequate evaluation procedure of compliance.
DIECI S.R.L. liability shall not be involved if equipment use or modi cations do not comply with the above
mentioned requirements.
 ATTENTION
Before commissioning each accessory, ensure compatibility with the vehicle and calibration of the safety
system relating to the used accessory.
 ATTENTION
Routine maintenance should be carried out regularly, keeping a record of the vehicle’s working hours.
 ATTENTION
The right and left positions indicated in this manual refer to the view of the operator sitting in the driver’s seat
(looking forwards).