Specifications

9
2.6 Warranty: request for intervention
2.6.1 Warranty: claim
The claim regarding the defect must be made by the Operator customer, the Authorised dealer, the Retailer or the Authorised
workshop and must reach the DIECI S.R.L. after-sales dept. within the maximum term of 8 days from its detection.
The claim must contain a clear description of the defect and the exact vehicle references (type, model and serial number). These
references are present on the machine in the positions indicated in the USE AND MAINTENANCE MANUAL.
2.6.2 Obligation for vehicle shutdown
If a risk exists that the defect can compromise the accident-prevention safety or cause further damage, it is mandatory not to use
the vehicle until it has been repaired and inspected.
Every modi cation made to the vehicle leads to a new veri cation of conformity with the 2006/42/CE Machinery
Directive. This procedure is also valid in the event of repairs using non-original spare parts.
For any dispute, the Court of Reggio Emilia – ITALY is acknowledged as having exclusive competence.
2.7 No activation, non concession, termination
2.7.1 Warranty: non concession
The warranty is not granted:
- when the defect is not reported in the ways and times established.
- when the request by DIECI S.R.L. . to return faulty parts replaced during the repairs intervention is not complied with.
- When the machine shutdown obligation has not been respected, limited to the damage caused by this infraction.
2.7.2 Warranty: termination
The warranty is stopped by right:
- When the buyer has not complied with the contractual obligations regarding payment.
- When the damage has been caused by carelessness, negligence, use non-conform to the indications stated in the use and
maintenance manual (manoeuvre errors, overloading, unsuitable re-fuelling, bad maintenance, failure to comply with the use
of indicator instruments, etc.)
- When the defect is due to applications, equipment, modifi cations or repairs that are not authorised by DIECI S.R.L. or carried
out using bad quality parts. (Regarding this, the use of original spare parts is advised).
Refer to the “MAINTENANCE” paragraph for periodic routine maintenance.