Specifications
139
10 MAINTENANCE AND CONTROL LOGS
The Maintenance Log and Control Log are to be considered integral parts of the machine and equipment
These logs must therefore accompany the machine and equipment throughout their service life up to the ļ¬ nal disposal.
10.1 Types of logs
10.1.1 Control Log
The Control Log contains the scheduled main inspections on the safety devices of the equipment, recommended by DIECI S.R.L..
These inspections guarantee that the safety devices work properly.
ī ATTENTION
The inspections contained in the Control Log form part of the routine maintenance operations contained in
the Equipment Maintenance Log.
10.1.2 Maintenance Log
The Maintenance Log contains all the scheduled maintenance interventions with reference to normal and not adverse conditions of use.
The intended maintenance must be performed more regularly, even daily, if required, in particularly adverse conditions of use
(humidity, mud, sand, very dusty, etc.).
Contact the DIECI service centre to establish the adequate schedules when operating in particularly adverse
environments.
Such maintenance allows the machine or equipment to be serviced in optimal eļ¬ ciency conditions.
10.2 Instructions to complete the logs
10.2.1 Warnings on the logs
- The logs must be completed in compliance with requirements set out in the Essential Safety Requirement 4.4.2.b of Annex I of
Machinery Directive 2006/42/EC, in order to prove that all maintenance and control operations regarding machine safety have
been carried out correctly.
- Besides the activities regarding the service life and maintenance and use of the machine (replacing parts, servicing, faults, etc.),
the logs must also include all the inspections stipulated by the regulations in force in the country where the machine is used.
- The name of the technician and the service date must also be indicated clearly.
- It is recommended to complete, update and store this control log with care for the duration of the service life of the machine.
ī NOTE
A few pages are found at the end of the manual for these logs to be completed.