Specifications

134
9.4.2 Recovery procedure for proportional
electro-hydraulic distributor *
* The proportional distributor is an optional
accessory installed on demand by the
customer.
 ATTENTION
Two qualify, expert operators authorised by
the safety manager are required to perform
the retraction manoeuvre.
To retract the boom, carry out the procedure given below.
1. Switch on the vehicle’s engine
2. Recover the pump activation bar in the toolbox
3. Screw the levers “C” and “D” in the joystick (Fig. 4-K0201)
4. Fix the bar to the pump “A” (Fig. 5-K0201)
5. To retract the boom:
- Operator 1 (Fig. 5-K0201):
• Position the lever “B” in position “1”
• Pump the hand pump moving the lever.
- Operator 2 (Fig. 7-K0201):
• While using the pump, move the lever “C” to the right to
retract boom extension
6. To lower the boom:
- Operator 1 (Fig. 6-K0201):
• Position the lever “B” in position “2”
• Pump the hand pump moving the lever.
- Operator 2 (Fig. 7-K0201):
• While using the pump, move the lever “D” to the left to
lower the boom
7. Having completed the recovery manoeuvres, move the
lever “B” to position “1”.
 WARNING
Move the basket by alternating extension
retraction and boom descent movements, in
a way to remain always within the capacity
diagram.
1
1
2
2
4- K0201
5- K0201
6- K0201
A
B
B
D
D
C
C
7- K0201