Specifications

2
1.4.1 Training
This manual supplies operators with all vehicle or equipment technical specifi cations, the presence and type of control and safety
devices and the presence and meaning of the plates and safety stickers.
All operators of the vehicle and any equipment must have all necessary information, education and training, adapted in relation to
the correct conditions of use of the means and the foreseeable anomalous risks.
The operators must be informed, educated and trained, if necessary, when introducing any new equipment and for each piece of
equipment available to operators.
 WARNING
Make sure that the Legislation and Standards in force in the country of sale are complied with on the subject
of sta information, education and training regarding use of the vehicle and its equipment.
The Employer must inform all staff regarding the following subjects regarding the safety during use:
- Risk of injury
- Devices provided for operator safety
- General accident-prevention rules and/or envisioned by international Directives
- Accident-prevention rules from the Legislation of the country of destination of the machine
Before starting to work, the operator must know the features of the machine and must have read this Use and Maintenance Manual
entirely.
1.4.2 Training
 ATTENTION
The operator assigned to using the vehicle must have attended a suitable theoretical-practical course with
the total duration provided by legislative provisions in the country of use of the machine or the equipment.
Training must include at least the following subjects:
- use and limit of the operational and emergency controls both of the equipment and the vehicle on which the equipment is
assembled.
- Knowledge and understanding of the Use and Maintenance Manual and the control signals, instructions and warnings affi xed
to the machine
- Knowledge and understanding of the Standards regarding this equipment, including training aimed at recognising and
preventing potential dangers in the work place
- knowledge of the mechanical operations of the vehicle in a suffi cient manner to allow recognition of a real or potential fault.
- preliminary remarks on construction parts of the vehicle and the concepts of static and dynamic stability.
- Procedures for correct use of the machine in safe conditions regarding the work area and the load handling/lifting, capacity
and driving skills
- Knowledge and use of the PPD to wear during use of the vehicle and equipment.
- Knowledge and execution of the periodic maintenance to perform
Training must be carried out under the supervision of a qualifi ed person in an open area free from obstructions. At the end of the
practice period, the trainee must be able to use the equipment, and the machine on which it is installed, safely.
The operator must also be informed regarding the responsibility and authority not to use the machine in the event of faults or in
the presence of unsafe conditions and to request further information from the Manufacturer or authorised dealer.