Specifications

123
8.2 Safe work procedures for the man baskets
For details regarding the procedures to be followed during operation, refer to the Use and Maintenance
Manual of the vehicle on which the equipment will be installed.
 PROHIBITION
THE MACHINES AND THE EQUIPMENT CANNOT BE MODIFIED WITHOUT THE MANUFACTURER’S
AUTHORIZATION.
It is prohibited to modify the structure of the equipment or the regulation of the safety devices of the various
components.
Do not modify the structure or the adjustment of the various vehicle or equipment components so as not to jeopardise own safety
and that of others. The same is valid for the deactivation or modifi cation of the safety devices present.
 ATTENTION
Any modi cation made to the man basket relieves DIECI S.R.L. from all liability deriving from consequent
damage or injury.
It is only possible to use certifi ed man baskets on DIECI vehicles and envisioned for the vehicle itself. The Manufacturer will not be
liable in the event of modifi cations and use of the man basket without its prior consent.
 ATTENTION
When using this machine, carefully follow the diagrams corresponding to the man basket installed.
 PROHIBITION
It is strictly forbidden to operate if the bearing capacity diagrams relative to the man basket that you are
about to use are not available.
 WARNING
The indications supplied by the vehicle anti-tilting over system must be considered valid for standard working
conditions, on  at, solid ground and with instruments operating and calibrated correctly. In all cases, the
values indicated by the capacity diagrams must be respected and never exceeded.
 ATTENTION
The equipment assembled on the vehicle can only be used on hard ground and with the vehicle braked,
levelled, secured and with a maximum gradient allowed of 2°.
 ATTENTION
The equipment installed on the vehicle must be used exclusively by skilled and authorized sta , which must
have read this manual. In the event of circulation on roads, refer to the vehicle Use and Maintenance Manual,
assuring that the operator has a driving licence in compliance with the Standards in force in the country of use
(B or higher for ITALY) and that the boom of the vehicle is in completely retracted position.
 WARNING
Before starting to use the vehicle and relative equipment or before performing particularly complex or
dangerous manoeuvres, it is necessary to practice with the vehicle in a free work area without obstacles.
 PROHIBITION
Do not install or use equipment on vehicles with unsuitable capacity.
 PROHIBITION
NEVER exceed the bearing capacity limits of the vehicle on which the equipment is installed.
 ATTENTION
If the equipment capacity is below the vehicle capacity, do not ever exceeed the bearing capacity of the
equipment.