Specifications

1
1 INTRODUCTION
1.1 Structure of the manual
This manual is an integral part of the offi cial documentation of the machine or the equipment. This must be kept with care and
made available to managers, operators and staff assigned to maintenance.
1.2 Purpose and content
This manual forms an integral part of the offi cial documentation and is aimed at providing the Operator all the information related
to the technical, operation and safety aspects in all phases of the machine’s service life.
 ATTENTION
This manual must be read carefully before using the machine for the  rst time or before performing the  rst
maintenance operation.
 WARNING
If in doubt regarding the correct interpretation of the instructions, contact the Manufacturer to obtain
clari cations.
1.3 Preservation
The instruction manual must be kept in the immediate vicinity of the Operators (in the cab or on the equipment where it is fi tted),
into a special bag, protected from liquids and anything else that may compromise the state of legibility.
If the manual should become crumpled and/or become even only partly damaged or illegible, or if the manual is lost, it must be
replaced immediately by contacting the DIECI TECHNICAL SUPPORT SERVICE providing the general specifi cations of the manual
indicated in the fi rst page of the manual.
1.4 Receivers
This manual is for the following categories of people:
- Operator: educated and trained person having followed a specifi c theoretical-practical course on machine or equipment use
- General maintenance technician: person educated and trained to perform routine maintenance interventions with basic
knowledge of mechanics, electricity and hydraulics.
- Specialised maintenance technician: person educated and trained to perform routine and extraordinary maintenance
interventions with in-depth and specifi c knowledge regarding mechanics, electricity and hydraulics, normally sent or authorised
by DIECI S.R.L. or authorised dealer.
 ATTENTION
Operators must not perform operations reserved for maintenance sta or quali ed technicians. The
Manufacturer does not respond to damage deriving from the failure to comply with this prohibition.