Specifications

111
7.4 Electric connections
7.4.1 Warnings
 ATTENTION
Before making the electric connections, perform the “Equipment installation procedure” and check that the
equipment is  xed correctly onto the vehicle.
 DANGER
Turn the vehicle o before making the electric connections.
 DANGER
Do not use the vehicle or the equipment if the electric cables are worn or damaged, but repair or replace
them.
 PROHIBITION
Do not leave the boom plug hung on the chain during work operations. It could be damaged, thus
compromising vehicle start-up during use without equipment.
 ATTENTION
Check that the electric cable does not become an obstruction for vehicle or equipment movements, as it
could be damaged.
 ATTENTION
When using equipment that has hydraulic and electric connections, these must always be correctly connected
to the vehicle. Failure to connect does not allow regular operation of the safety devices, with risk of injury/
damage to persons and objects and vehicle roll-over hazard.
Consult the equipment manual to check the correct operation of the same.