Specifications

109

 ATTENTION

Before connecting or disconnecting the

telescopic handlers, check that there is no

residual pressure inside the hydraulic circuit.

7.3.6 Closed-centre distributor: Discharge the

pressure via the joysticks:

If a closed-centre hydraulic distributor is installed on the

vehicle and the joystick and services lever is present:

1. Switch the engine oﬀ

2. Shift the services lever (Fig. 1-I0201) in both directions

3. Make the hydraulic coupling connections

7.3.7 Closed-centre distributor: Discharge the

pressure via the trailer Down button:

If a closed-centre hydraulic distributor is installed on the

vehicle and the “trailer down” is present:

1. Turn the vehicle engine on

2. Press the “Trailer down” button (Fig. 2-I0201) to discharge

the residual pressure of the entire hydraulic plant

3. Turn the engine oﬀ without performing further

operations.

4. Make the hydraulic coupling connections

1- I0201

2- I0201