Specifications

103
7.3 Hydraulic connections
7.3.1 Warnings
 ATTENTION
Before making the hydraulic connections, perform the “Equipment installation procedure” and check that
the equipment is  xed correctly onto the vehicle.
 WARNING
Always clean the hydraulic connections thoroughly before every engagement. If both of the hydraulic
connections are not used, they must be protected using the relevant plastic caps.
 DANGER
Do not use the vehicle or the equipment if the hydraulic cables are worn or damaged, but repair or replace
them.
 ATTENTION
Check that the hydraulic hoses do not become an obstruction for vehicle or equipment movements, as they
could be damaged.
Consult the equipment manual to check the correct operation of the same.
 DANGER
Once the hydraulic connections have been made, it is mandatory to check that the controls are coherent with
the operations performed by the vehicle.
By reversing the connections, the accessory functions could be reversed with respect to normal use. Therefore,
after having concluded the equipment installation procedures, try the various functions in a free area.
 ATTENTION
When using equipment that has hydraulic and electric connections, these must always be correctly connected
to the vehicle. Failure to connect does not allow regular operation of the safety devices, with risk of injury/
damage to persons and objects and vehicle roll-over hazard.