Specifications

96
 ATTENTION
Before all use, check:
- that the equipment is correctly mounted and locked onto its support
- that the cab safety device is set in compliance with the equipment assembled.
- that the specifi c bearing capacity diagram for the vehicle and equipment mounted is present on the vehicle.
 ATTENTION
Scrupulously comply with the respective Capacity diagrams when using the vehicle.
 PROHIBITION
It is prohibited to operate if the capacity diagrams relative to the type of vehicle and equipment installed are
not present.
 WARNING
The indications supplied by the vehicle anti-tilting over system must be considered valid for standard working
conditions, on  at, solid ground and with instruments operating and calibrated correctly. In all cases, the
values indicated by the capacity diagrams must be respected and never exceeded.
 ATTENTION
Every time the equipment is used, it is mandatory to insert the shear pins to fasten the equipment to the tool-
carrier plate.