Specifications

88
6.9 Using the controls on the
aluminium basket push-
button panel
6.9.1 Enabling the controls
In order to use the controls provided on the basket, you must
fi rst enable the controls by rotating the knob, that enables the
controls from the basket (Fig. 30-G0000, pos.A), from position
“0” to position “1”.
Turn the basket control enabling knob to position “0”:
• all controls present on the basket will be disabled.
Turn the basket control enabling knob to position “1”:
• You will enable the controls from the basket.
• The basket movement controls are disabled from
machine cab.
• If the machine is provided with stabilizers and the
movements are blocked.
• The machine cannot perform any further movement.
6.9.2 Switching on the machine from the
basket
 DANGER
Before using the basket, check that all basket
doors are properly closed and all the operators
inside the basket are properly fastened with
the appropriate safety devices.
 WARNING
Before starting the engine, check that the
emergency stop push-button (Fig. 30-G0000,
pos.C) is not pressed and the knob that enables
the controls from the basket is in position “1”
(Fig. 30-G0000, pos.A).
In order to start the machine’s engine, turn the start knob (Fig.
30-G0000, pos. B) for a few seconds, until the engine starts.
30- G0000
AC B