User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
Manufacturer´s Certification
1.6
1.6 Important Notes
Diebold Nixdorf is not responsible for any radio and television malfunctions which emerge from unautho-
rized changes in the device. Make sure that only cables and devices may be connected which are admit-
ted by Diebold Nixdorf. The user is responsible for any malfunctions that emerge from the actions men-
tioned before.
The device may only be installed, or repaired by authorized qualified personnel. Unautho-
rized opening of the device and inexpertly carried-out repairs may not only seriously jeopar-
dize the safety of the user, but also cancel all warranty and liability agreements.
Expansion cards with electrostatically sensitive devices (ESD) may be marked with this
sticker.
CAUTION: Hot surface. Do not touch.
When opening the device or handling modules fitted with ESD, please observe the following instructions,
which pertain to all electrostatic sensitive devices (ESDs):
• Always use the antistatic kit.
• Statically discharge yourself, for example by touching an earthed object (such as a heat radiator) be-
fore beginning to work with ESD-labeled components.
• Likewise, all equipment and tools used in working with such components must be free of static
charge.
• Pull the mains plug before inserting or removing such components.
• Only handle such components by their edges.
• Never touch any terminal pins of the strip conductors on such components.
Copyright © 2020, Diebold Nixdorf
01750342843B
1-5