User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
Peripherals (optional)
Figure14-22: Fitting the NFC module into the Beetle A Series
6. Insert the NFC module into the now exposed
USB port of the Beetle A Series.
7. Fit each knob on the NFC Module into its re-
spective groove on the system as indicated.
1
2
Figure14-23: Tightening the screws of the NFC module
8. Then put on and tighten two M3x4 screws at
(1) and (2).
Copyright © 2020, Diebold Nixdorf
01750342843B
14-12