User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
14
14 Peripherals (optional)
14.1
14.1 Waiter Lock
The Waiter Lock module is used for system access control.
The operation of the system is very simple, the key is placed onto the magnetic probe (see figure). The
key is held magnetically to the probe and transmits the data by an electrical USB interface.
The readout of the data may be integrated easily in a software application.
NOTE
For guide on software application programming, please refer to BA9x MSR/Waiter Lock
Programming Manual.
14.1.1
14.1.1 Installation
Figure14-1: Waiter Lock kit
1. The Waiter Lock kit as seen. Containing the
Waiter Lock module and two M3x4 screws.
Copyright © 2020, Diebold Nixdorf
01750342843B
14-1