User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
Mounting a Second Display (A1150/D1101)
10. Secure the adapter to the D1101 using the 4
countersunk VESA screws (1) provided in
the adapter kit.
11. Route the cable along the path indicated by
the arrows.
12. At the stand side, remove the 2 VESA
screws securing the main system to the
stand.
Copyright © 2020, Diebold Nixdorf
01750342843B
13-5