User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
Installation to a stand
1
3. Tilt the system back to access the connector
panel at the bottom of the system display.
4. Remove the cable cover (1) at the bottom of
the system display.
1
5. Plug the USB-C cable into the port indicated
(1).
6. Route the cables from the connector panel in
the path as illustrated (arrows).
7. Replace the cable cover previously removed.
Copyright © 2020, Diebold Nixdorf
01750342843B
9-12