Instruction manual

14
Remote Observation Setup
Recording Setup - Advanced
Select the Advanced option from the
Record Mode dropdown menu. An
window will appear to indicate that the
Mode has changed.
• Camera Group - Select the Channel
Area (CH1~4 or CH5~8)
• Schedule Mode - Set to Weekly or
Daily. When the System is set to
weekly mode, set each day
individually
• Pre Event Recording Time - Sets
the Pre-Event Recording Time
(between 0 ~ 5 Seconds). The
Pre-Event records the data that
occurred before the Event occurred.
Refer to the Observation System
Instruction Manual for more details.
• Post Event Recording Time - Sets
the Post-Event Recording Time
(between 5 ~ 180 Seconds). The
Post-Event records the data that
occurred after the Event occurred.
Refer to the Observation System
Instruction Manual for more details
• Alarm / Continuous / Motion
Record Setup - Click the “Set”
Button to setup the Cameras for
Alarm, Continuous and Motion
Recording: Set the Size, Recording
Rate. Quality and Audio for each
camera. Press OK to save the
Settings.
• Alarm / Continuous / Motion
Recording Schedule - Use the
mouse to select individual time
blocks for Alarm, Continuous and
Motion Recording. Selected blocks
are displayed in Blue.