Operating instructions

91500 Revision B
12 DiCon Fiberoptics VX500 Fiberoptic Switch
Figure 8:
2
×
N Non-Blocking Channel Order (Top View)
To select the output channel of a 2
×
N non-blocking switch with up to 32 output channels,
set the five channel address inputs (<D4:D0>) and the RESET input as indicated in
Table 4, then strobe the device.
Table 4:
Control Codes For 2
×
N Non-Blocking Configurations
RESET D4 D3 D2 D1 D0
Common 1
Active Channel
Common 2
Active Channel
0xxxxx0 reset -1 reset
1000001 0 block
1000012 1
1000103 2
1000114 3
1001005 4
1001016 5
1001107 6
1001118 7
1010009 8
10100110 9
10101011 10
10101112 11
10110013 12
10110114 13
10111015 14
10111116 15
11000017 16
11000118 17
11001019 18
11001120 19
11010021 20
11010122 21
11011023 22
11011124 23
11100025 24
COMMON 1
COMMON 2
CHANNEL 1
CHANNEL 2
CHANNEL N
COMMON 1
COMMON 2
CHANNEL 1
CHANNEL 2
CHANNEL N