Operating instructions

ManualsBrandsDicon ManualsComputer equipmentVX500

October 20, 1998

Switch Operation 11

To select the output channel of a simplex 1

N switch with up to 50 output channels (1

25),

set the five channel address inputs (<D4:D0>) and the RESET input as indicated in

Table 3, then strobe the device.

N Non-Blocking Configurations

The relationship between the optical inputs and outputs of a VX500 2

N non-blocking

switch is shown in Figure 7.

Figure 7:

N Non-Blocking Switch Configuration

The arrangement of the fiber pigtails on a VX500 2

N non-blocking switch is shown in Fig-

ure 8. The left diagram applies to switch units with up to 16 output channels. The right dia-

gram applies to units with 17–32 output channels.

Table 3:

Control Codes for Synchronous Duplex 1

N Configurations

RESET D4 D3 D2 D1 D0

Common 1

Active Channel

Common 2

Active Channel

0xxxxx0 reset 0 reset

1000001-1 1-2

1000012-1 2-2

1000103-1 3-2

1000114-1 4-2

1001005-1 5-2

1001016-1 6-2

1001107-1 7-2

1001118-1 8-2

1010009-1 9-2

10100110-1 10-2

10101011-1 11-2

10101112-1 12-2

10110013-1 13-2

10110114-1 14-2

10111015-1 15-2

10111116-1 16-2

11000017-1 17-2

11000118-1 18-2

11001019-1 19-2

11001120-1 20-2

11010021-1 21-2

11010122-1 22-2

11011023-1 23-2

11011124-1 24-2

11100025-1 25-2

-1

block