DICKSON Temperature Chart Recorder Operation Contents: Charts & Accessories Product Applications and Useful Features Product Specifications Charts & Accessories Calibrations Operating Instructions / Getting Started Troubleshooting Warranty / Factory Service & Returns Product Specifications SC3 Product Applications & Useful Features DICKSON Calibrations Operating Instructions / Getting Started Troubleshooting Warranty/ Factory Service & Returns Rev.
Useful Features Charts & Accessories Rugged case ideal for transportation and storage applications F/C Switchable, 24 hour/7 day Switchable Easy user calibration Security slots for recorder security Special ranges for refrigerators, freezers, incubators and ambient conditions Optional tamper seals can be used to insure the integrity of the chart Compact (less than 4” tall/wide) and durable Operates for up to 2 years on a single “AA” battery Direct sensing, no remote probe, compact enough to be placed almo
DICKSON Product Specifications Product Applications & Useful Features Product Specifications Charts & Accessories Temperature Sensor: Precise spiral wound bi-metallic strip transducer Recorder Accuracy: ±4˚F (±2.
7 Day °F Chart C302 C304 C320 C306 C308 7 Day °C Chart C310 C312 C318 C341 C316 24 Hour °F Chart C301 C303 C319 C305 C307 24 Hour °C Chart C309 C311 C317 C313 C315 Accessories Order # N300 N400 P222 A715 A711 Product Specifications Description NIST Traceable Calibration 3-pt. (new unit) A2LA Accredited Calibration 3-pt.
N100 - NIST Traceable Calibration 1-Point: Includes documentation to one Dickson pre-selected point on new units only. N400 - Deluxe A2LA Accredited NIST Traceable Calibration 3-Point: ISO Guide 25/A2LA Documentation of 3 pre-selected points of as found data before and after calibration for Dickson temperature and/or humidity instrumentation on new units only.
Pen Replacement Product Applications & Useful Features • Place chart on recorder • Set time by inserting a coin into chart hub and turning clockwise until the current hour is referenced to the time index clip. (Time index clip is directly to the right and below the pen tip). • Remove protective pen cap. The chart movement is self-starting and runs continuously. Allow unit to stabilize in environment for 15 minutes. DICKSON Getting Started Slide the used pen cartridge off and slide the new one on.
Chart Does Not Rotate If the chart is not rotating make sure the center strip of the chart is inserted properly into the black center hub of the recorder making sure the chart is not torn or ripped. If the chart is properly installed and there is still no rotation the clock needs to be replaced, please call customer service for a return authorization number.
Contact the factory (630-543-3747) for a Return Authorization (RA) Number before returning any instrument. The model number, serial number and a purchase order number will be requested before an RA number is issued. Software Return Policy IMPORTANT-Read your Software License Agreement carefully before installing software. DIckson will accept returns for replacement of defective disks and CDs only.
