user manual

ManualsBrandsDickson Industrial ManualsThermometerCo., Ltd. Thermometer Midsize Display Loggers Operation

Rev. 1/06

DICKSON

SM720/SM725 & TM725

Midsize Display Loggers Operation

Contents:

Product Applications and Useful Features

Product Speciﬁcations

Product Accessories

Frequently Asked Questions

Calibrations

DicksonWare Software Speciﬁcations

Operating Instructions / Getting Started

Troubleshooting

Warranty / Factory Service & Returns

Order Form

Product

Applications &

Useful Features

Product

Speciﬁcations

Product

Accessories &

FAQs

Calibrations DicksonWare

Software

Speciﬁcations

Operating

Instructions /

Getting Started

Troubleshooting Warranty/

Factory Service

& Returns

DICKSON

TM725

Remote Probe Temperature

& Humidity Logger

SM720

2 Channel Temperature Logger

(Internal & Remote K-TC)

SM725

2 K-TC Channel Temperature

Data Logger

All models shown with optional memory card

Summary of content (10 pages)

PAGE 1
DICKSON DICKSON Product Applications & Useful Features SM720/SM725 & TM725 Midsize Display Loggers Operation Contents: Product Specifications Product Applications and Useful Features Product Specifications Product Accessories Frequently Asked Questions Calibrations DicksonWare Software Specifications Operating Instructions / Getting Started Troubleshooting Warranty / Factory Service & Returns Order Form Product Accessories & FAQs Calibrations DicksonWare Software Specifications TM725 Remote Probe Tem
PAGE 2
Featuring our fastest data download ever! Download data in just seconds, using new USB port compared to 1.5 minutes using standard serial port. Or, leave the logger in the field and use memory cards to transfer data to your PC.
PAGE 3
SM725 Internal Temp. Accuracy: ±1.8°F (±1°C) ±1.8°F (±1°C) External Temp. Sensor: Thermocouple (2) Thermocouple External Temp. Range: -300 to +2000˚F (-184 to +1093˚C) -300 to +2000˚F (-184 to +1093˚C) External Temp. Accuracy: ±1.8°F (±1°C) (unit) ±1.8°F (±1°C) (unit) External Temp. Sensor: External Temp. Range: Thermistor -40 to +185°F (-40 to +85°C) ±0.8°F (±0.
PAGE 4
(for current pricing go to www.dicksonweb.
PAGE 5
N100 - NIST Traceable Calibration 1-Point: Includes documentation to one Dickson pre-selected point on new units only. N400 - Deluxe A2LA Accredited NIST Traceable Calibration 3-Point: ISO Guide 25/A2LA Documentation of 3 pre-selected points of as found data before and after calibration for Dickson temperature and/or humidity instrumentation on new units only.
PAGE 6
DICKSON DicksonWare™ Software Specifications Product Applications & Useful Features • Microsoft Windows® compatible • Allows for simple viewing and zooming of logged data • Easy set-up of Dickson Data Loggers including: • User selectable sample intervals from 10 seconds to 24 hours • Display temperature in °C or °F • Delayed logger start times • Logger data capacity can be set to wrap data or stop when full • Allow for real time monitoring and graphing.
PAGE 7
Alarm Pressing this button will silence the alarm. Holding this button down for about 5 secounds will toggle between Fahrenheit and Celsius. (Alarm parameters can only be set in DicksonWare™.) MIN/MAX Pressing this button will start the Min/Max display cycle. Note: DicksonWare™ will show the minimum and maximum values of the downloaded data. These could be different than that displayed on the unit itself.
PAGE 8
Note: Unit must have AC Power to work on network. Preferences setup: Under File/Preferences/Communications there are options for communication methods, where USB, Serial, or Network communications can be toggled on or off. Note: Detailed instructions for using DicksonWare™ software is available in the Software Manual. Troubleshooting Troubleshooting Continued on next page Warranty/ Factory Service & Returns Rev.
PAGE 9
NOTE: Removing the battery will not erase any stored data The display reads Prob on RF (remote probe) • Is there an extension cable being used? It could be defective. Omit the extension cable and try another K-type probe. PLEASE VISIT WWW.DICKSONWEB.COM FOR COMPLETE TROUBLESHOOTING GUIDE Warranty • Carefully repack the instrument, label the outside of the box with the RA# and return the instrument (freight pre-paid) to Dickson.
PAGE 10
Step 1 - Bill To: Product Applications & Useful Features Name Company Address City State Phone ( Email Zip ) – Product Specifications Step 2 - Ship To (if different than above) Zip ) – Calibrations Total $ $ $ $ $ $ $ $ DicksonWare Software Specifications Step 3 - Ordering Information Order # Quantity Price/Unit $ /each $ /each $ /each $ /each Subtotal: In Illinois, add 7.5% sales tax 4 Tax: Freight: All Prices in U.S.