for selected Mazda vehicles Installation Guide/User manual
Copyrights and Trademarks Copyright 2011 DICE Electronics, LLC. The DICE Electronics logo is a trademark of DICE Electronics, LLC. iPod is trademark of Apple, Inc. All rights reserved. Printed in the U.S.A.
Table of Contents Warning and safety ..........................................................4 Answering / making a phone call ...................................23 Product registration .........................................................5 Playing music from a cell phone Silverline DUO kit contents .................................................6 through Silverline DUO via Bluetooth..........................24 Dip switch setting .............................................................
Warning and safety! Please read these instructions carefully before proceeding. Failure to follow instructions may result in improper operation or injury. Neither DICE Electronics, LLC. nor Apple Inc., its regional offices, distributors or resellers take any responsibility for any damage or injury as a result of using the integration kit. - Do not open, disassemble or alter the interface in any way. - Do not insert anything into the casing.
Congratulations on your purchase! Thank you for purchasing the DICE integration kit for iPod. Please review our user manual and installation guide before operating the unit. This interface was designed and manufactured to seamlessly integrate with your vehicle’s factory entertainment system. Product registration We recommend registering your DICE product so you can receive news about important firmware updates and have unlimited access to our online support system.
Silverline DUO kit contents Silverline DUO module user manual Optional accessories (sold separately): AUX connector IR Receiver & Remote controller Vehicle bus connector (SAT) iPod docking cable
Dip switches The configuration switches located on the Silverline DUO module are used to set various operation modes of the interface. Incorrect dip switch settings may cause the DICE interface to not work properly or to not operate at all.
Dip switch setting The dip switch positions will configure the Silverline DUO module to interface with the vehicle’s radio in various emulation modes. Depending on which configuration is chosen, you will need to refer to the instructions in this manual specific to that emulation mode. Car configuration switches SAT Emulation Car configuration switches CDC Emulation OFF ON OFF ON Use this setting for best user experience. Only available on SAT capable radios.
Supported iPod models and firmware version requirements Model Firmware / OS Version Model Firmware / OS Version 1G nano 1.3.1 160 GB classic 2.0.4 iPod 5G 1.3 5G nano 1.0.2 2G nano 1.1.3 3G touch iOS 4.3.5 iPod classic 1.1.2 iPhone 4 iOS 4.3.5 3G nano 1.1.3 4G touch iOS 4.3.5 iPod touch iOS 3.1.3 6G nano 1.0 iPhone iOS 3.1.3 iPhone 3G iOS 4.2.1 4G nano 1.0.4 120 GB classic 2.0.1 2G touch iOS 4.2.1 iPhone 3GS iOS 4.3.
Installation 1. Verify compatibility 5. Route kit to glove box or other accessible location 2. Disconnect battery 3. Remove radio from car 4. Install Silverline DUO cable 6. Connect battery & test 7. Complete install by re-installing radio Some radios will enter an anti-theft security mode and will lock requiring the radio’s security code to be entered to unlock it. This code can be requested from the vehicle’s dealership.
Connection Diagram Silverline DUO module (front) Vehicle BUS connector Auxiliary device SIRIUS SAT radio (not included) (not included) SIRIUS connector* IR receiver (optional) AUX connector (optional) Silverline DUO module (back) Update port (USB to PC) iPod/iPhone (not included) iPod dock cable* * Do not connect the iPod dock cable under any circumstance to the SIRIUS module connector! Improper connection can cause permanent damage to iPod/SIRIUS module.
Attention installer! Please read the following! DICE Electronics strongly recommends that the unit be installed in an easily accessible place! DO NOT PLACE IT BEHIND THE RADIO! Whether the unit is professionally or self installed, put the module where you, the end user can get to it easily in the future. (Have the installer show you where the DICE interface module is installed.
sable conte Less brow Playlist Artist Album able content By default, the interface creates a Playlist having a name that is the same as the name of the iPod. This Playlist is the very first on the list of Playlists shown while browsing in Playlist mode. This Playlist contains all the songs on the iPod. Once a Playlist is selected an Artist may be selected within that Playlist using the Artist Mode. Albums by the selected Artist within the selected Playlist may be selected in Album Mode.
How the iPod’s Hold Button Works with Silverline DUO Radio control Limited iPod control Before connecting the iPod to the DICE module, turn the hold switch ON to fully control and browse the songs from the wireless remote. The iPod is locked in this state. Before connecting the iPod to the DICE module, turn the hold switch OFF to fully control and browse the songs from iPod. Browsing capabilities are limited from the wireless remote.
SAT emulation: Basic operation Accessing the DUO as the audio source: Much like the radio’s AM/FM tuner, satellite radio or CD audio sources, the Silverline DUO is integrated to be part of the vehicle’s audio system. To access the DUO source, press the SAT button on the radio. DUO source selection: The DUO adds additional audio sources including iPod, SIRIUS Satellite Radio* and auxilliary audio input*.
SAT Emulation: Selecting Silverline DUO as an Audio Source SAT 1 4 2 N TU USH EP AUTO-M- DIS P-E Radio source selector (SAT / Silverline DUO) 2 Press for Next / Previous track. 3 Press to toggle between available text fields. TURN to scroll text. 4 Press to enter/exit shuffle and repeat settings. Press track up to cycle between random song, random albums, random OFF. PUSH PWR SN 3 1 H AUDIO CO NT PUS Press track down to cycle between repeat song, repeat all or repeat OFF.
SAT Emulation: Sirius ConnectTM Operation • Stations can be saved to PRESET 1-6 by holding a preset or remote button (1-6). • TEXT or DISP button will toggle between the text fields. Press & Hold Press Press NOTE: It may be possible to tune to an invalid channel number with certain radios. Invalid channel numbers are indicated by an “INVALID” message on the radio. Press Press • If a Sirius Connect compatible tuner is not detected, then an “AUX” message will be displayed.
CDC emulation: Basic operation Accessing the DUO as the audio source: Much like the radio’s AM/FM tuner, satellite radio or CD audio sources, the Silverline DUO is integrated to be part of the vehicle’s audio system. To access the DUO source in CDC emulation mode, press the CD button on the radio. Pressing this button repeatedly will cycle through the available sources (CD > DUO).
CDC Emulation: Selecting Silverline DUO as an Audio Source SAT 2 USH EP AUTO-M- PUSH PWR DIS P-E SN N TU 1 3 H AUDIO CO NT PUS 1 Radio source selector (CDC / Silverline DUO) 2 Press for Next / Previous track 3 Press to FFW or RW currently playing track 4 Change iPod browsing mode
The Livio Car Internet Radio application (iPhone/iPod touch) This DICE integration kit includes support for the Livio Car Internet Radio application. It’s available on the iTunes® Store, try the FREE app and listen to hundreds of Internet-based radio programming options streamed through the 3G/ Edge or Wi-Fi connection. Download the upgraded Livio Car Internet Radio application for a fee to stream more than 45,000 AM/ FM and Internetonly radio streams from around the world.
Controlling the Livio Car Internet Radio app The app must be active on the screen of the iPhone or iPod touch. To do so, users can simply tap the Livio icon on their device and it will load. For example, users can tap on the text area of the app to stop or play the selected stream. For additional details or further support, please visit http://www.livioradio.com/car/. Next/previous TRACK buttons cycle between Livio station presets.
If your listening experience is interrupted by a call, under most conditions, the application will resume playback at the end of the call. Music playback applications running on your iPhone are sent to background automatically when the home button of the phone is pressed, but the music playback itself is not stopped. To resume playback of your iPod music library, stop Livio playback by tapping on the screen below the Livio Radio logo. An icon representing “stop” will show on the main Livio screen.
Terminate (kill) the Livio Car Internet Radio app If you need to terminate (kill) the Livio application please follow the steps below: 1. Double-tap on the home button of the iPhone to bring up the list of running applications. If you don’t see the Livio Car Internet Radio icon right away, swipe the screen left or right to locate it.
Optional Remote Kit: Functions for iPod/Livio Internet Radio app SOURCE iPod: Shuffle SONG (within a PLAYLIST) / Shuffle ALBUM / Shuffle off Toggle the audio sources between iPod and SIRIUS/AUX Play / Pause iPod: Repeat one / Repeat all / Repeat off iPod: Next Track Livio: Next station preset 3 iPod: Previous Track Livio: Previous station preset 6 1 iPod: Skip to the next PLAYLIST 4 iPod: Skip to the previous PLAYLIST iPod: Skip to the next ALBUM iPod: Skip to the previous ALBUM Livio: Butto
Optional Remote Kit: Wireless Remote Function for SIRIUS Next Category Toggle the audio sources between iPod and SIRIUS/AUX Previous Category Next Channel Previous Channel Recall preset SIRIUS channel Note: To display SIRIUS ID, go to channel 000. Using the remote to change SIRIUS channels will cause the channel number displayed on the radio to be out of sync with the actual channel number. To synchronize channel numbers, change channels using the controls on the radio.
Troubleshooting Problem Solution Text is not displaying in selected emulation. Identify your audio system first and set switches accordingly on Silverline DUO module. Use the DISP button on radio/display to toggle text fields. CD emulation has no text display. iPod does not charge. Check all connections. See if iPod charges while connected to computer or wall charger. You may need to reset the iPod. Music is distorted or sound level is too low with iPod connected.
Problem Solution No audio from iPod source. Reset the iPod. Verify proper connection to iPod/interface. Check for compatibility. Why does the radio display show “EMPTY/STOP” and no music plays? The iPod has reached the end of a playlist. Please select a new Playlist. Cannot select the interface. Ensure the cable connecting DUO is securely connected to the correct receptacle. Verify that the correct button is used to access the interface. Radio/ steering wheel controls do not operate iPod.
Problem Why does the message “iPod UNLOCKED” display on screen? Solution When the Silverline DUO is playing iPod music in UNLOCKED mode, browsing mode information isn’t available so the “iPod UNLOCKED” notification is shown. To view information associated with browsing modes, ensure the iPod’s hold button is set before connecting it to Silverline DUO.
Firmware update STEP 1: Disconnect the Silverline DUO module from the vehicle. STEP 2: Download and install necessary software from www.diceelectronics.com STEP 3: Open software to follow instructions for updating Silverline DUO unit. STEP 4: Plug in Silverline DUO via mini USB cable and update. STEP 5: Disconnect and reinstall the unit into the vehicle.
Disclaimer & Warranty Important disclaimer, please read! Unauthorized reproduction or reverse engineering is strictly prohibited! Intellectual property included is distributed under specific license agreement with respective owners and is licensed only, not sold. No warranty, explicit or implied, is stated. Neither DICE Electronics, LLC., nor any of its agents, distributors, dealers or vendors shall be liable for damages.
Installation notes:
Mazda compatible integration for iPod, iPhone SIRIUS and AUX. www.diceelectronics.
