Installation guide

~DICE::
.. ·.-ELECTRC>-J~CE3
Scrolling feature - in SAT emulation, Mode 6 (Only with AudiNW-SAT kit)
To set and change scrolling feature press CAT/FLDR button repeatedly until Mode 6 is selected. Change options by
pressing SeeklTrack or turning the Tune dial. After setting the desired feature turn off the ignition for at least 50
seconds to engage the new selection.
XM 1 001
SHORT SCROL
SOFTWARE VERSI
XM 1 001
SHORT STAT
SOFTWARE VERSI
XM 1 001
LONG STAT
SOFTWARE VERSI
XM 1 001
LONG SCROL
SOFTWARE VERSI
Certain amount of blinking is normal on some radios when the scrolling feature is on.
Firmware version information - in SAT emulation, Mode 6
Firmware versions are displayed while in Mode 6. This may be needed by a support technician if troubleshooting is
necessary. Having this information ready before requesting technical support may expedite the troubleshooting
process.
XM 1 001
XM 1 001 XM 1 001 XM 1 001
SHORT STAT c~~ SHORT STAT C~~ SHORT STAT C~~ SHORT STAT
( CAR 1.00J ( IPOD 100 J ( AUX 100 J ( CORE 1.00 ")
~=:::;::::oo-'o<.-_-----'