Apps | iPhone | iPod | Satellite Radio | AUX for selected Toyota/Lexus/Scion vehicles Installation Guide/User manual
Copyrights and Trademarks Copyright 2012 DICE Electronics, LLC. The DICE Electronics logo is trademarks of DICE Electronics, LLC. iPod and iPhone are trademarks of Apple, Inc. All Trademarks and Logos are the property of their respective owners. All rights reserved. Printed in the U.S.A.
Table of Contents Warning and safety ..........................................................4 Text display fields in CDC/MD emulation ...........................20 Product registration .........................................................5 Operating the DUO iPod source ........................................21 Silverline DUO kit contents ..............................................6 Operating the DUO in SAT emulation ................................22 Identify your audio system ...........
Warning and safety! Please read these instructions carefully before proceeding. Failure to follow instructions may result in improper operation or injury. Neither DICE Electronics nor Apple Inc., its regional offices, distributors or resellers take any responsibility for any damage or injury as a result of using the integration kit. - Do not open, disassemble or alter the interface in any way. - Do not insert anything into the casing.
Congratulations on your purchase! Thank you for purchasing this integration kit. Please review this booklet before operating the unit. This interface was designed and manufactured to seamlessly integrate with your vehicle’s factory audio system. Product registration We recommend registering your DICE product so you can receive news about important firmware updates and have unlimited access to our online support system. To register your DICE product, please complete the following steps: 1.
Silverline DUO kit contents for selected Toyota/Lexus/Scion vehicles Installation Guide/User manual Silverline DUO module user manual Optional accessories (sold separately): AUX connector IR Receiver & Remote controller For more accessories, visit www.diceelectronics.
Identify your audio system Select the emulation that best suits your vehicle. The following chart identifies the recommended emulation for the listed radios. Note that your vehicle may support more than one type of emulation. 06-11 06-11 Note: Years and feature sets listed are shown as a guideline only and do not guarantee compatibility or limit applicability. * Not all radios support MD mode. If an external MD changer is present, it must be disconnected.
DIP switches overview The configuration switches located on the Silverline DUO module are used to set various operation modes of the interface. Incorrect DIP switch settings may cause the interface to not work properly or to not operate at all.
DIP switch settings The following DIP switch settings are used to configure the Silverline DUO module to interface with the various vehicle radios. Before installation, set the DIP switch to the position shown for the corresponding radios. Car configuration switches Satellite (SAT) CD changer (CDC) OFF ON ON Use this setting for best user experience. Only available on SAT capable radios. To enable use of the SIRIUS Connect tuner, SAT emulation must be used.
Supported iPod models and firmware version requirements Model Firmware / OS Version Model Firmware / OS Version 1G nano 1.3.1 160 GB classic 2.0.4 iPod 5G 1.3 5G nano 1.0.2 2G nano 1.1.3 3G touch iOS 5 iPod classic 1.1.2 iPhone 4 iOS 5 3G nano 1.1.3 iPhone 4S iOS 5 iPod touch iOS 3.1.3 4G touch iOS 5 iPhone iOS 3.1.3 6G nano 1.2 iPhone 3G iOS 4.2.1 4G nano 1.0.4 120 GB classic 2.0.1 2G touch iOS 4.2.
Attention installer! Please read the following! DICE strongly recommends that the unit be installed in an easily accessible place! DO NOT PLACE IT BEHIND THE RADIO AND DO NOT HIDE UNDER CARPET! Whether the unit is professionally or self installed, put the module where you, the end user can get to it easily in the future. (Have the installer show you where the interface module is installed.
Connection diagram Silverline DUO module (front) Vehicle Interface Cable Auxiliary device SIRIUS SAT radio (not included) (not included) SIRIUS connector* IR receiver (optional) AUX connector (optional) Silverline DUO module (back) Update port (USB to PC) iPod/iPhone (not included) iPod dock cable* *Do not connect the iPod dock cable under any circumstance to the SIRIUS module connector! Improper connection can cause permanent damage to iPod/SIRIUS module.
Installation 1. Verify compatibility 5. Route kit to glove box or other accessible location 2. Disconnect battery 3. Remove radio from car 4. Install Silverline DUO cable 6. Connect battery & test 7. Complete install by re-installing radio Some radios will enter an anti-theft security mode and will lock requiring the radio’s security code to be entered to unlock it. This code can be requested from the vehicle’s dealership.
sable conte Less brow Playlist Artist Album able content By default, the interface creates a Playlist having a name that is the same as the name of the iPod. This Playlist is the very first on the list of Playlists shown while browsing in Playlist mode. This Playlist contains all the songs on the iPod. Once a Playlist is selected an Artist may be selected within that Playlist using the Artist Mode. Albums by the selected Artist within the selected Playlist may be selected in Album Mode.
iPod locked/unlocked settings and features Radio control Limited iPod control Before connecting the iPod to the module, turn the hold switch ON to fully control and browse the songs from the wireless remote. The iPod is locked in this state. Before connecting the iPod to the module, turn the hold switch OFF to fully control and browse the songs from iPod. Browsing capabilities are limited from the wireless remote.
Basic operation Accessing the DUO as the audio source: Much like the radio’s AM/FM tuner, satellite radio or CD audio sources, the Silverline DUO is integrated to be part of the vehicle’s audio system. To access the DUO source, press the SAT button (if SAT emulation is set) or DISC button (if CDC, MD or MP3 emulation is set) on the radio. Pressing this button repeatedly will cycle through sources present in the vehicle (CD > DUO).
Operating the DUO in CDC/MD emulation mode (non-NAV radio) Press the TEXT button to cycle betwen display fields Press RND to Shuffle songs, press and hold to shuffle albums Arrow shows if additional text information is available. Hold TEXT button for more information. See pg.
Operating the DUO in CDC/MD emulation mode (NAV radio) Press DISC RPT to repeat all Press DISC RAND to shuffle albums Navigation radio screen A Press TITLE to toggle between screens A and B Press RPT to repeat one Press RAND to shuffle songs Navigation radio screen B Press to change track Note that in MD mode MD1/2 will be displayed instead of CD1/2. Some display types vary and don’t have all available buttons.
Operating the DUO in MP3 emulation mode Source indicator Some display types vary and don’t have all available buttons.
Text display fields in CDC and MD emulation modes (non-NAV radio) Press the TEXT button to cycle through the available text fields. In CDC and MD modes there are two available text fields. Please see illustration below for an example of how the text button works in Playlist mode (DISC 2): Text is paged in these modes (where supported). Additional text information can be viewed by pressing the and holding the TEXT button.
Controlling the DUO iPod source in CDC, MD or MP3 emulation modes The Silverline DUO features content browsing making it easy to find by song, playlist, artist, podcast and audiobook. After connecting the iPod, select the desired browsing mode by selecting the appropriate DISC. Press the SEEK button or turn the TUNE dial repeatedly to browse contents; 1 second after releasing the button, your selection is executed. The browsing below is illustrated in the “track” text field.
Operating the DUO in SAT emulation mode (non-NAV radio) Turn TUNE dial to change track Use the TYPE button to engage/disengage RW or FFW Press to change track Use SCAN to enter shuffle and repeat selection Use the PRESET 1-6 buttons to change browsing modes (see pg.
Operating the DUO in SAT emulation mode (NAV radio) DICE Press the TEXT button to toggle between available screens DICE Use TYPE SCAN to enter shuffle & repeat selection DICE Use the TYPE button to engage/ disengage RW or FFW DICE
Text display fields - SAT emulation (non-NAV radios) Press the TEXT button to cycle through text fields. In SAT emulation there are three available text fields. PLease see illustration below for an example of how the TEXT button works for song mode (PRESET 1): *Channel number changes with mode; indicating browsing mode for iPod and preset association for SIRIUS channel.
Text display fields - SAT emulation (non-NAV radios) The Silverline DUO features content browsing making it easy to find by song, playlist, artist, podcast and audiobook. After connecting the iPod, select the desired browsing mode by selecting the appropriate PRESET button. Press the SEEK button or turn the TUNE dial repeatedly to browse contents; after releasing the button, your selection is executed. *Only available when iPod is locked.
Controlling the DUO SIRIUS source (SAT emulation only) The Silverline DUO integration kit features SIRIUS connectivity. Use the SEEK button or TUNE dial to browse between subscribed channels. To store a subscribed channel to memory: Tune to the station to be stored, press and hold the desired PRESET buttons to save. To recall a memorized channel: Simply press the desired PRESET button (PRESET 1-6).
Internet Radio Application support (iPhone/iPod touch) This kit includes support for internet radio streaming apps available on the iTunes® Store. Thousands of stations can be streamed through data connections. Supported apps include Livio Car Internet Radio, Pandora, iHeart Radio and more. Supported features such as text display on screen, and next/previous track functions will vary by app. To learn more about each app specifically, please visit the website for the app you need information about.
Controlling Internet Radio Apps NOTE: The following features may not be supported by all apps. For demonstration purposes the following examples will show the features for the Livio Car Internet Radio app. The app must be active on the screen of the device. To do so, simply tap the app’s icon and it will load. Next/previous TRACK buttons execute application specific features such as skipping stream or cycling between station presets.
If your listening experience is interrupted by a call, under most conditions, the app will resume playback at the end of the call. Music playback apps running on your iPhone are sent to background automatically when the home button of the phone is pressed, but the music playback itself is not stopped. To resume playback of your iPod music library, stop Livio playback by tapping on the screen below the Livio Radio logo. An icon representing “stop” will show on the main Livio screen.
Terminate (kill) the App If you need to terminate (kill) the app please follow the steps below: 1. Double-tap on the home button of the iPhone to bring up the list of running apps. If you don’t see the app’s icon right away, swipe the screen left or right to locate it. Note: If you do not see such task bar but rather a music control popup then you have an iOS device that does not support background run of apps, therefore this section is not applicable to you. 2.
Auxiliary audio source (only with optional AUX connector) The DUO AUX cable (ACC-106-AUX) can be used to connect an auxiliary device, such as an MP3 player, DVD player or other audio source. The auxiliary audio source can be accessed in both CDC and SAT emulation modes. To access AUX audio source: - Plug the mini DIN connector of the AUX adapter cable into the SIRIUS receptacle and connect the 1/8” mini stereo jack to the sound output of your audio device. - Enter AUX mode (see pg. 16).
Optional Remote Kit: Functions for iPod/App SOURCE iPod: Shuffle SONG (within a PLAYLIST) / Shuffle ALBUM / Shuffle off Toggle the audio sources between iPod and SIRIUS/AUX Play / Pause iPod: Repeat one / Repeat all / Repeat off iPod: Next Track App: Next station/song (App dependant) 3 iPod: Previous Track App: Prev station/song (App dependant) 6 1 iPod: Skip to the next PLAYLIST 4 iPod: Skip to the previous PLAYLIST iPod: Skip to the next ALBUM iPod: Skip to the previous ALBUM *Next / Previ
Optional Remote Kit: Functions for SIRIUS Next Category Toggle the audio sources between iPod and SIRIUS/AUX Previous Category Next Channel Recall preset SIRIUS channel Previous Channel Note: To display SIRIUS ID, go to channel 000. Save the current SIRIUS channel in the corresponding preset. Note: Saving presets with the remote will be different from the presets saved by the radio.
Troubleshooting Problem Radio/NAV display only shows DISC and track number and there is no iPod control. Solution Make sure DIP switch settings are correctly set for text display (refer to page 8 for DIP switch settings). No text display on radio. Make sure DIP switch settings are correctly set for text display (refer to page 8 for DIP switch settings). Radio/steering wheel controls do not operate iPod. Reset iPod and make sure most recent iPod firmware is installed.
Problem Solution Sirius tuner can’t be selected. Ensure the cable connecting SIRIUS tuner is securely connected to the correct receptacle. Why does the radio display show “EMPTY/STOP” and no music plays? The iPod has reached the end of a playlist. Please select a new Playlist. Cannot select the interface. Ensure the cable connecting DUO is securely connected to the correct receptacle. Verify that the correct button is used to access the interface (DISC/SAT).
Problem Solution Why does the message “iPod UNLOCKED” display on screen? When the Silverline DUO is playing iPod music in UNLOCKED mode, browsing mode information isn’t available so the “iPod UNLOCKED” notification is shown. To view information associated with browsing modes, ensure the iPod’s hold button is set before connecting it to Silverline DUO. The radio displays track/channel 99 (“TR 99” or ”CH99”). Track up/down controls do not work.
Updating Firmware (Mac OS illustrated) Silverline DUO DUO AVW ABP 2.01 DUO Connect module via mini USB Device specifications and update selection License Agreement (click Agree to proceed) Product registration notification Firmware update progress Module updated successfully! The above screen shots are for illustration purposes only.
Disclaimer Important disclaimer, please read! Unauthorized reproduction or reverse engineering is strictly prohibited! Intellectual property included is distributed under specific license agreement with respective owners and is licensed only, not sold. No warranty, explicit or implied, is stated. Neither DICE Electronics, LLC., nor any of its agents, distributors, dealers or vendors shall be liable for damages.
Support and Warranty If you experience any problems or need help, please contact you local dealer or call DICE Electronics, LLC. At 888-342-3999 or visit us at http://diceelectronics.com/product-support. Products carry a 1 year limited warranty that protects you from defects in material and workmanship of products sold by DICE Electronics or its authorized agents, distributors and dealers. The warranty period begins the day a product is purchased by the end user.
Toyota/Lexus/Scion compatible integration for iPod/iPhone, Internet Apps, SIRIUS and AUX. www.diceelectronics.
