DICE interface for iPod for selected Audi/Volkswagen vehicles Installation Guide/User Manual for model number Audi/VW-CDC and Audi/VW-SAT integration kits
Copyrights and Trademarks Copyright 2008 DICE Electronics, LLC. The DICE Electronics logo is a trademark of DICE Electronics, LLC. iPod is a trademark of Apple, Inc. All rights reserved. Printed in the U.S.
Table of contents Copyrights and trademarks Icon legends Warranty and safety Product registration Supported iPod models iPod hierarchy Charging 3 3 4 5 6 7 7 Audi/VW-CDC integration kit Integration kit contents DIP switches DIP switch settings Installation iPod audio source Controls in CDC emulation Browsing function in CDC emulation 8-19 9 10 11 12 18 18 19 Audi/VW-SAT integration kit Integration kit contents DIP switches DIP switch settings Installation 20-29 21 22 23 24 iPod audio source Controls i
Warning and safety! Please read these instructions carefully before proceeding. Failure to follow instructions may result in improper operation or injury. Neither DICE Electronics, LLC. nor Apple Inc., its regional offices, distributors or resellers take any responsibility for any damage or injury as a result of using the integration kit. - Do not open, disassemble or alter the interface in any way. - Do not insert anything into the casing.
Congratulations on your purchase Thank you for purchasing the DICE integration kit for iPod. Please review our user manual and installation guide before operating the unit. This interface was designed and manufactured to seamlessly integrate with your vehicle's factory entertainment system. Product registration In order to validate your warranty period and to receive telephone or online support, you MUST register your DICE product. To register your DICE product, please complete the following steps: 1.
Supported iPod models and firmware version requirements FW:3.1.1 FW:1.2.1 FW:1.0.3 iPod iPod iPod classic 4th generation 20GB 40GB 4th generation color display 20GB 30GB 40GB 60GB 80GB 160GB FW:1.2.1 FW:1.4.1 iPod iPod mini 5th generation (video) 30GB 60GB 80GB 4GB 6GB FW:1.3.1 FW:1.1.3 FW:1.0.3 iPod nano 3th generation (video) 4GB 8GB FW:1.1.
Playlist Artist Album More br owsable content By default, the interface creates a Playlist having a name that is the same as the name of the iPod. This Playlist is the very first on the list of Playlists shown while browsing in Playlist mode. This Playlist contains all the songs on the iPod. Once a Playlist is active an Artist may be selected within that Playlist using the Artist Mode. Albums by the selected Artist and within the selected Playlist may be selected in Album Mode.
Audi/VW-CDC integration kit
Integration kit contents 1 Vehicle specific interface unit 1 iPod docking cable Vehicle specific harnesses (R,R1,R2)* 1 User manual DICE interface for iPod for selected Audi/Volkswagen vehicles Ground wire Ground wire Installation Guide/User Manual Audi-R harness * Note that your kit may contain one or more harnesses.
Dip switches The configuration switches located on the DICE module are used to set the operation of the interface by the installer. Incorrect dip switch settings may cause the DICE interface not to work properly or not to operate at all. Disconnect the vehicle harness from module and cycle ignition off for 50 seconds after changing the switches! OFF DICE Module ON 1 ON 1 2 ON 1 2 "Car Config. "iPod Config.
Dip switch settings iPod configuration switches Car configuration switches Settings Settings CD changer (CDC) Dip switch 1 Dip switch 2 OFF OFF Switches should remain in the default OFF position. OFF OFF "Locked" "iPod" Dip switch 1 Dip switch 2 Dip switch 1 Dip switch 2 OFF OFF It is best selected when advanced controls on the radio are used. After the initialization the iPod will be locked for an increased interface functionality.
Installation Installation should only be performed by a qualified professional. Beware of sharp edges to avoid injury and exercise caution when removing trims as they may break. The module should be placed at an accessible location to allow AUX cable to be connected, such as in the glove box, the center console or under the front seat. 1 Pull vehicle into service bay and access radio/center console. 2 Disconnect both battery terminals.
10 5a - Audi radios with R connectors - You can access the CD changer connector located on the back of the radio. Unplug the factory connection if present and plug the Audi-R BUS connector into the receptacle. The connector should securely lock. Ground wire MUST be connected to a stable grounding point.
10 5b - VW radios with R1 connectors -You can access the CD changer connector located on the back of the radio. Unplug the factory connection if present and plug the VW-R1 BUS connector into the receptacle. The connector should securely lock. Ground wire MUST be connected to a stable grounding point.
5c - VW radios with R2 connectors -You can access the CD changer connector located on the back of the radio. Unplug the factory connection if present and plug the VW-R2 BUS connector into the receptacle. The connector should securely lock. Ground wire MUST be connected to a stable grounding point.
5c - Cable modification - If vehicle is equipped with factory Satellite radio and desired to be retained, a harness modification is required. 1 Disconnect main radio 2 Slide out the inner part of the 4 Remove the SAT wires from harness and locate SAT SAT connector from plastic the factory connector by connector. Remove it from housing. releasing the pins with a main harness by pressing on small screw driver or ballthe release tab of the SAT point pen. connector. 6 Put plastic connector covers back on.
6 Connect the vehicle specific connector and the iPod docking cable to the DICE module. Apply cable ties to secure the cables. receptacle 1/8" iPod AUX dock input cable input vehicle specific connector iPod docking cable receptacle vehicle specific connector 7 Verify that all connections have been properly made. 8 Reconnect the car's battery. Test the unit before seating the cables and reinstalling the panels/trim.
iPod audio source Controls in CDC emulation Press the CD button to access the interface and its features. Pressing this button repeatedly will cycle through sources present (internal CD if present, followed by external) in your vehicle. When the iPod audio source is active (DISC 5, Track1),press the Track button or turn the Tune dial to select next/previous Song. Press to change Track, hold to Rewind or FForward. 1 CD EXT CD 01:52 CD EXT 4 2 CD EXT TRACK 12 CD EXT 5 3 CD EXT Press to change DISC.
Browsing function - in CDC emulation After connecting the iPod and selecting the CD changer source, use the desired mode by selecting DISC 1-4. To change Track press the Track button or turn the Tune dial. Text display is not supported, however recent iPod firmware upgrades show the Title/Artist information of the currently played song. Alternately, you may select iPod mode (p.11).
Audi/VW-SAT integration kit
Integration kit contents 1 Vehicle specific interface unit 1 iPod docking cable Vehicle specific harnesses (Audi/VW-CAN)* 1 User manual DICE interface for iPod for selected Audi/Volkswagen vehicles Installation Guide/User Manual Audi/VW-CAN harness (type 1) Audi/VW-CAN harness (type 2) * Note that your kit may contain one or more harnesses, in some cases they may look different from the ones illustrated above.
Dip switches The configuration switches located on the DICE module are used to set the operation of the interface by the installer. Incorrect dip switch settings may cause the DICE interface not to work properly or not to operate at all. Disconnect the vehicle harness from module and cycle ignition off for 50 seconds after changing the switches! OFF DICE Module ON 1 ON 1 2 ON 1 2 "Car Config. "iPod Config.
Dip switch settings Car configuration switches iPod configuration switches Settings Multi-line display Dip switch 1 Dip switch 2 OFF OFF This is the recommended setting for radios that have multiple text fields displayed in Satellite emulation mode. Settings "iPod" Dip switch 1 Dip switch 2 Dip switch 1 Dip switch 2 Single-line display Dip switch 1 Dip switch 2 ON OFF This setting is recommended for radios where there is only 1 text field displayed in Satellite emulation mode.
Installation Installation should only be performed by a qualified professional. Beware of sharp edges to avoid injury and exercise caution when removing trims as they may break. The module should be placed at an accessible location to allow AUX cable to be connected, such as in the glove box, the center console or under the front seat. 1 Pull vehicle into service bay and access radio/center console. 2 Disconnect both battery terminals.
10 5a - Audi/VW radios with "Y-harness" type CAN1 connection -You can access the SAT connector located on the back of the radio. Unplug the factory connection if present and plug the Audi/VW CAN connector in. Connect the factory plug to the cable receptacle if it was removed from the radio. The connector should securely lock. The factory SAT tuner must be disconnected at the tuner which is usually located in the trunk or under the passenger seat.
5b - Audi/VW radios with "Y-harness" type CAN2 connection -You can access the SAT connector located on the back of the radio. Unplug the factory connection if present and plug the Audi/VW CAN connector in. Connect the factory plug to the cable receptacle if it was removed from the radio. The connector should securely lock.The factory SAT tuner must be disconnected at the tuner which is usually located in the trunk or under the passenger seat.
6 Connect the vehicle specific connector and the iPod docking cable to the DICE module. Apply cable ties to secure the cables. receptacle 1/8" iPod AUX dock input cable input vehicle specific connector iPod docking cable receptacle vehicle specific connector 7 Verify that all connections have been properly made. 8 Reconnect the car's battery. Test the unit before seating the cables and reinstalling the panels/trim.
iPod audio source Controls in SAT emulation Press the SAT button to access the interface and its features. When the iPod audio source is active (Mode 5, Channel 1), use the Track button or the Tune dial to select next/previous Song. Source indicator EJECT LOAD This text field may not be shown on all radios. FM XM 1 001 CAT FLDR SNG TITL AM Press to cycle through Modes 1-6.
Silverline browsing function - in SAT emulation The Silverline integration kit features content browsing. After connecting the iPod, select the desired browsing mode by pressing the appropriate CAT/FLDR button. Press the Seek/Track button or turn the Tune dial repeatedly to browse contents; 1 second after releasing the button, your selection is executed.
Scrolling feature - in SAT emulation, Mode 6 (Only with Audi/VW-SAT kit) To set and change scrolling feature press CAT/FLDR button repeatedly until Mode 6 is selected . Change options by pressing Seek/Track or turning the Tune dial. After setting the desired feature turn off the ignition for at least 50 seconds to engage the new selection.
Auxiliary audio source Connections 1/8" AUX input Sleeve (Ground) Ring (Right audio) Tip (Left audio) The interface is equipped with a 1/8” AUX jack connection to connect an auxiliary device, such as an MP3 player, DVD player or other audio source. To access the AUX audio source, select DISC 5, Track 2 or Mode 5, Channel 2.
AUX audio source setting The auxiliary input has settings for gain, bass, mid and treble in order to optimize sound. Volume (Gain) should be adjusted if the audio level from the auxiliary device is too low or to high. If you hear distorted audio while playing the auxiliary device, you need to reduce (-) the gain. If you notice that the audio is too quiet then the gain setting should be increased (+). Default settings are "50" ("68" for gain) and values may be adjusted in increments between 01-99.
Troubleshooting Problem Cannot select the interface. No audio from iPod source. Solution Check DIP switch settings (refer to pp.11, 23). With the ignition OFF disconnect vehicle harness from module for a few seconds and reconnect. Verify that the correct button is used to access the interface (CDC or SAT). Reset the iPod. Verify proper connection to interface. Reset iPod and make sure most recent iPod firmware is installed. Check vehicle user manual on how steering wheel controls work.
Troubleshooting Problem Interface has erratic recognition or not at all. Solution Make sure that the ground wire harness is attached to back of radio. Text is not displaying. Set iPod switches to OFF for "Locked" mode. Text display is only supported on SAT-capable radios. iPod does not charge. Check all connections. Reset iPod and make sure iPod charges while connected to computer or wall charger. Music is distorted or sound level is too low.
Disclaimer and warranty Important disclaimer, please read! Unauthorized reproduction or reverse engineering is strictly prohibited! Intellectual property included is distributed under specific license agreement with respective owners and is licensed only, not sold. No warranty, explicit or implied, is stated. Neither DICE Electronics, LLC., nor any of its agents, distributors, dealers or vendors shall be liable for damages.
Audi/VW compatible integration for iPod www.diceelectronics.