DICE interface for iPod for selected Toyota/Lexus/Scion vehicles Installation Guide/User Manual
Copyrights and Trademarks Copyright 2008 DICE Electronics, LLC. The DICE Electronics logo is a trademark of DICE Electronics, LLC. iPod is a trademark of Apple, Inc. All rights reserved. Printed in the U.S.
Table of contents Copyrights and trademarks Icon legends Warranty and safety Product registration Supported iPod models iPod hierarchy Charging Integration kit contents Identify your car DIP switches DIP switch settings Installation 2 3 4 5 6 7 7 8 9 10 11 13 iPod audio source Controls in CDC/MD emulation Controls in MP3 emulation Text display fields in CDC/MD/MP3 emulation Browsing function in CDC/MD/MP3 emulation Controls in SAT emulation Text display fields in SAT emulation Browsing function in SAT emu
Warning and safety! Please read these instructions carefully before proceeding. Failure to follow instructions may result in improper operation or injury. Neither DICE Electronics, LLC. nor Apple Inc., its regional offices, distributors or resellers take any responsibility for any damage or injury as a result of using the integration kit. - Do not open, disassemble or alter the interface in any way. - Do not insert anything into the casing.
Congratulations on your purchase Thank you for purchasing the DICE integration kit for iPod. Please review our user manual and installation guide before operating the unit. This interface was designed and manufactured to seamlessly integrate with yourr vehicle's factory entertainment system. Product registration In order to validate your warranty period and to receive telephone or online support, you MUST register your DICE product. To register your DICE product, please complete the following steps: 1.
Supported iPod models and firmware version requirements FW:3.1.1 FW:1.2.1 FW:1.0.3 iPod iPod iPod classic 4th generation 20GB 40GB 4th generation color display 20GB 30GB 40GB 60GB 80GB 160GB FW:1.2.1 FW:1.4.1 iPod iPod mini 5th generation (video) 30GB 60GB 80GB 4GB 6GB FW:1.3.1 FW:1.1.3 FW:1.0.3 iPod nano 3th generation (video) 4GB 8GB FW:1.1.
Playlist Artist Album More br owsable content By default, the interface creates a Playlist having a name that is the same as the name of the iPod. This Playlist is the very first on the list of Playlists shown while browsing in Playlist mode. This Playlist contains all the songs on the iPod. Once a Playlist is active an Artist may be selected within that Playlist using the Artist Mode. Albums by the selected Artist and within the selected Playlist may be selected in Album Mode.
Integration kit contents 1 Vehicle specific interface unit 1 Vehicle specific harness (R2) 1 iPod docking cable 1 User manual DICE interface for iPod for selected Toyota/Lexus/Scion vehicles Installation Guide/User Manual 8
Identify your audio system Select the emulation that best suits your vehicle. The following chart identifies the recommended emulation for the listed radios. Note that your vehicle may support more than one type of emulation.
Dip switches The configuration switches located on the DICE module are used to set the operation of the interface by the installer. Incorrect dip switch settings may cause the DICE interface not to work properly or not to operate at all. Disconnect the vehicle harness from module and cycle ignition off for 50 seconds after changing the switches! OFF DICE Module ON 1 ON 1 2 ON 1 2 "Car Config. "iPod Config.
Dip switch settings Car configuration switches Settings CD changer (CDC) Dip switch 1 Dip switch 2 OFF OFF Recommended for radios NOT supporting Satellite (XM) or if factory SAT is installed and user wishes to retain it. Selected vehicles from 2003 offer CD Text - these radios have a Text button. OFF Mini DISC (MD) Dip switch 1 ON OFF Recommended for early model year radios with external CD changer. MD Text is only available on very few radios, typically navigation ones.
iPod configuration switches Settings "Locked" "iPod" Dip switch 1 Dip switch 2 Dip switch 1 Dip switch 2 OFF OFF It is best selected when Text display is supported by the radio. After connecting the iPod you will see the DICE logo on the screen. After the initialization the iPod will be locked for an increased interface functionality. OFF ON ON It is best selected when Text display is NOT supported by the radio. Track numbers and times are not synchronized between the iPod and radio.
Installation Installation should only be performed by a qualified professional. Beware of sharp edges to avoid injury and exercise caution when removing trims as they may break. The module should be placed at an accessible location to allow AUX cable to be connected, such as in the glove box, the center console or under the front seat. 1 Pull vehicle into service bay and access radio/center console. 2 Disconnect both battery terminals.
5a - Radios with large connector -You can access the CD changer connector located on the back of the radio. Unplug the factory connection if present and plug the Toyota BUS connector into the receptacle. Plug the factory connection to the cable receptacle if it was removed from the radio. The connector should securely lock. Toyota BUS connector cable receptacle The cable receptacle is only for cars where the steering wheel control was plugged into the radio.
5b - Radios with small connector -You can access the CD changer connector located on the back of the radio. Unplug the factory connection if present and plug the Toyota BUS connector in. Connect the factory plug to the cable receptacle if it was removed from the radio. The extension receptacle mates with the vehicle specific harness. The connector should securely lock.
6 Connect the vehicle specific connector and the iPod docking cable to the DICE module. Apply cable ties to secure the cables. receptacle 1/8" iPod AUX dock input cable input vehicle specific connector iPod docking cable receptacle vehicle specific connector 7 Verify that all connections have been properly made. 8 Reconnect the car's battery. Test the unit before seating the cables and reinstalling the panels/trim.
iPod audio source Controls in CDC/MD emulation Press the CD/CDC/DISC button to access the interface and its features. Pressing this button repeatedly will cycle through sources present (internal CD if present, followed by external) in your vehicle. When the iPod audio source is active (DISC 5, Track1), use the Seek track button to select next/previous Song. Note that radios without a Text button will only display DISC and Track numbers.
Press DISC RPT to Repeat All. CD2 CHANGER DISC Press DISC RAND to Shuffle Albums. 1 TRACK Example: Toyota radio with Navigation CD2 1' 24" 99 CHANGER DISC 1 TRACK 1' 24" 99 DISC DISC 1 2 3 4 Playlist Name 5 6 TRACK PLAYLIST TITLE SOUND Press TITLE to toggle between screens. DISC RPT DISC RAND DISC SCAN RPT RAND SCAN Press RPT to Repeat One. Press RAND to Shuffle Songs. TITLE OFF SOUND Press to change Track.
Controls in MP3 emulation Source indicator PWR VOL TUNE FILE MP3 CD CHANGER1 Press to change Track. FOLDER SEEK TRACK FILE 1 FILE 35 FOLDER 1'58" FOLDER LIST Album * Artist Song 1 2 3 AM SAT 4 5 FM DISC AUX 6 MENU DEST MAP FOLDER SOUND AUDIO TILT DISPLAY Press RPT short for Repeat one, long for Repeat All. Source selector SCAN INFO RPT RAND SCAN Press to select PRESET numbers 1-6. Turn to change Track. LOAD Press RAND short for Shuffle Songs, long for Shuffle Albums.
Text display fields - CDC/MD emulations, Non-Navigation radios Press the Text button to cycle through the available Text fields. In CDC and MD mode there are two available text fields. Please see illustration below in Playlist mode (DISC 2): DISC CD1 TR 2-1 2'32 TEXT DISC CD1 TEXT PLAYLIST TR CD1 Playlist name Text is paged in these modes (where supported). Additional text information can be viewed by pressing and holding the Text button.
Silverline browsing function - in CDC/MD/MP3 emulation The Silverline integration kit features content browsing. After connecting the iPod, select the desired browsing mode by selecting the appropriate DISC. Press the Seek button or turn the Tune dial repeatedly to browse contents; 1 second after releasing the button, your selection is executed. The browsing function below is illustrated in the "Track" text field.
Controls in SAT emulation Press the AM/SAT button to access the interface and its features. When the iPod audio source is active (Preset 5, Channel 1), use the Seek button or the Tune dial to select next/previous Song. Example: Toyota radio without Navigation FILE Turn to change Track. SAT1 Album * Artist Press to change Track. TYPE FOLDER FM1 SCAN Use Scan to enable Shuffle Songs. 22 FM2 AM SAT DISC AUX Use the TYPE button to engage/disengage RW or FFW. TEXT Use Presets to change modes.
Example: Toyota radio with Navigation SAT1 SOUND DICE 1 CH001 2 CH002 3 CH003 CH001 Track Playlist Artist TEXT TYPE Press the TEXT button to toggle between available screens. TYPE DICE SAT1 DICE CH001 DICE TITLE 4 CH004 Album Playlist Name 5 CH005 NAME 6 CH006 Source PLAYLIST Version TYPE SEEK TYPE SCAN Use TYPE SCAN to enable Shuffle Songs. SOUND TEXT TYPE TYPE TYPE SEEK TYPE SCAN Use the TYPE button to engage/disengage RW or FFW.
Text display fields - SAT emulations, Non-Navigation radios Press the Text button to cycle through Text fields. In SAT emulation there are three available text fields. Please see illustration below for Track mode (Preset 1): This text field is fixed. SAT1 1ch 001 SAT1 TEXT DICE Channel number changes with mode.
Silverline browsing function - in SAT emulation The Silverline integration kit features content browsing. After connecting the iPod, select the desired browsing mode by pressing the appropriate Preset button. Press the Seek button or turn the Tune dial repeatedly to browse contents; 1 second after releasing the button, your selection is executed.
Scrolling feature - in SAT emulation, PRESET 6 To set and change scrolling feature go to Preset 6 and press the Text button. Change options by pressing Seek track or turning the Tune dial. After setting the desired feature turn off the ignition for at least 50 seconds to engage the new selection. SHORT SCROLL ... 6 TEXT SHORT STAT SEEK TRACK or LONG STAT ... LONG SCROLL Certain amount of blinking is normal on some radios when the scrolling feature is on.
Auxiliary audio source Connections 1/8" AUX input Sleeve (Ground) Ring (Right audio) Tip (Left audio) The interface is equipped with a 1/8” AUX jack connection to connect an auxiliary device, such as an MP3 player, DVD player or other audio source. To access the AUX audio source, select DISC 5, Track 2 or Preset 5, Channel 2.
AUX audio source setting The auxiliary input has settings for gain, bass, mid and treble in order to optimize sound. Volume (Gain) should be adjusted if the audio level from the auxiliary device is too low or to high. If you hear distorted audio while playing the auxiliary device, you need to reduce (-) the gain. If you notice that the audio is too quiet then the gain setting should be increased (+). Default settings are "50" ("68" for gain) and values may be adjusted in increments between 01-99.
Troubleshooting Problem Cannot select the interface. Solution Check DIP switch settings (refer to p.11). With the ignition OFF disconnect vehicle harness from module for a few seconds and reconnect. Verify that the correct button is used to access the interface. No audio from iPod source. Reset the iPod. Verify proper connection to iPod/interface. Radio/ steering wheel controls do not operate iPod. Reset iPod and make sure most recent iPod firmware is installed.
Troubleshooting Problem Text is not displaying in selected emulation. Solution Identify your audio system first (p.9) and set switches accordingly. Note that your vehicle may support more than one mode. iPod does not charge. Check all connections. Reset iPod and make sure iPod charges while connected to computer or wall charger. Music is distorted or sound level is too low. Check and make sure all EQ and BASS boost options are turned off on your iPod. (Refer to AUX settings on p.
Disclaimer and warranty Important disclaimer, please read! Unauthorized reproduction or reverse engineering is strictly prohibited! Intellectual property included is distributed under specific license agreement with respective owners and is licensed only, not sold. No warranty, explicit or implied, is stated. Neither DICE Electronics, LLC., nor any of its agents, distributors, dealers or vendors shall be liable for damages.
Toyota/Lexus/Scion compatible integration for iPod www.diceelectronics.
