Instructions

www.diclaadsystemen.nl
17
NL
DE
EN
NL
DE
EN
1 SAFETY INSTRUCTIONS
Please read the enclosed documentation carefully first. Keep in mind that you
are working in an electrical installation.
Make sure that no voltage is present during the installation of the charging point.
The charging station has been designed in accordance with the most recent regu-
lations in force, in accordance with IEC 61851.
Safe assembly may only be carried out by a qualified electrician from an approved
company. Improper use can lead to danger of life.
2 MOUNTING PLAN BLACKBOXX WITH SOCKET
The charging point has an IP value of 54 and is suitable for outdoor mounting.
Determine the correct position and height for your charging station. When using
a spiral cable, take the height into account! The BlackBoxx comes with external
mounting brackets as standard.
Use the external brackets for a guaranteed waterproof housing. Open the charger
with a suitable screwdriver, to open turn the screw a quarter turn to the left (to the
right to close). The cable can be fed through the cable gland at the bottom or through
the grommet at the rear. When using the rear lead-through, replace the lower cable
gland with the supplied membrane tulle.