User manual

Maker will release an up-to-date firmware for improving its quality, making more
efficient or correcting any problem with PDVR-1000 without any notice in advance.
Regularly visit the maker's website or local distributor's website.
තG
Strangly recommend to upgrade with connecting AC/DC Adaptor.
තG
Do not power off or press any key while upgrading. It may cause very serious problem to the unit.
තG
If upgrading is made, some setting values are back to the factory defaults, so it is required to
set up once again if necessary.
තG
If there is a malfunction or hang-up, please reset by pressing rest hole on the bottom.
1. How to upgrade a firmware
GGྙ Download the last firmware from an indicated website.
GGྚ Unzip the firmware if it is compressed.
GGྛ Connect it to PC with USB cable.(If PDVR-1000 is in power off, turn it on.)
GGྜ If connecting is OK, the below folders are displayed on the top of the root directory.
GGྜྷ Copy "upgrade" folder out of the unzipped firmware file and paste it to the root directory
of PDVR-1000.
GGྞ Disconnect PDVR-1000 from the PC and turn it off automatically, but if it may not turn
it off automatically, try it off manually.
GGྟ Turn it on once again. If so it starts the procedures of upgrade automatically as below
and then turn it off automatically. It may take a little time.
GG
Turn it on and check the firmware version.
photo video voice
photo video voice
upgrade
Setting -> System setup -> Firmware version.
Upgrading Firmware
Upgrading Firmware
10
37