User manual

1. Main Menu

RECORD

Previewing before recording.

Recording a video input signal from the connected camera.

- The file recorded in this mode is stored at the "VIDEO".

VIDEO

Recording an video input signal from the connected camera.

- A recorded video file(s) is stored here and played back.

VOICE

Recording a voice input signal from a built-in microphone or

a microphone on the camera.

- A recorded audio only file(s) is stored here and played back.

PHOTO

- Previewing before snap photo.

Taking a snap shot.

A photo file(s) taken by Snap Shot is stored here and reviewed.

SETTING

- User can set up setting values.

2. Operation of Each menu

1) RECORD

In this mode, user can make a video (Video+Audio or Video Only) and previews what is

recorded before starting a recording.

තGIf starting a recording, STOP won't work within 5seconds.

තGMaximum size of the file to be made in PDVR-1000 is 4GB. So when a file size is reached to 4GB in

a recording, it automatically saves the file and then start a new recording with new file index.

තGDo not take a SD card out while recording to external memory storage but if it is made, PDVR-1000

automatically powers off. The file was recording just befor taking the SD card won't be displayed on

PDVR-1000, but it might be playable on a PC.

තGBefore starting a recording, make sure the battery status. We strongly recommend to record with

AC/DC adaptor for long recording.

තGIn case of selecting "Video+Audio" as an Input source in Rec. Setup, audio is not recorded together

if 5fps is selected in frame rate. So if it is necessary to record audio together with video at 5fps, set

up the frame rate at over 10fps.

Main Menu & Operation