User's Manual

▶ Call / Receive Call / Hang-Up / Reject Call / Call Transfer
Call : Call by mobile phone, RED Led of Call button will be turned ON if lamp got pairing with
mobile phone.
Receive call : If lamp got pairing with mobile phone, ring at a time by mobile phone and lamp.
Red LED of call button will be turned ON and take a phone call by press call button shortly as 0.5
sec.
Hang-up : After finish phone call, press call button shortly as 0.5 second.
Rejects call : For reject call, press call button during 1.5 second
Transfer call : Press call button during 3 second, it could be transferred lamp mode or mobile
phone mode conversation.(Press call button again during 3 second, it will be transferred again)
※ Music playing will be stopped temporary while user takes a phone call.
▶ Ready for Bluetooth
User can listen to music or take a phone call by Bluetooth pairing with external Bluetooth devices
or Bluetooth mobile phone. First, user should check device which has Bluetooth function.
Bluetooth version : V2.1 + EDR / Profile : A2DP,HFP,SPP / Frequency : 2400~2483Mhz / Wireless
output : Power class2
▶ Pairing with mobile phone or other Bluetooth devices.
Pairing Bluetooth between DL-60BSH and Bluetooth devices.
DL-60BSH will catch other Bluetooth devices in a close range after first pairing is succeeded.
▶ Steps of pairing
1) Stand-by mode after press Bluetooth button during 3 seconds.
2) Red LED of call button and Bluetooth button will be blinked 2 times periodically during Stand-
by mode for pairing. User can search device by Bluetooth device or mobile phone at that time.
Find out DL60BSH in searching list of Bluetooth device or mobile phone.
3) Press 0000 PIN code for mobile phone’s request.(PIN code won’t not requested by some
mobile phones)
4) Red LED of Bluetooth button will be stopped blinking after succeed pairing.
※ Bluetooth button and Red LED of call button will be turned off if pairing is failed in 2 min.
※ Bluetooth device could be connected to lamp in a close range if device is succeeded pairing
already. (Two devices should be Bluetooth ON status)
※ Press Bluetooth button, Red LED of Bluetooth button will be ON during connecting to mobile
※ phone or Bluetooth devices and Red LED of Bluetooth button will be ON after connected.
※ Play mode will be stopped if press Bluetooth button during playing music by Bluetooth fairing
mode. Bluetooth connection will be disconnected if press Bluetooth button during 3 sec.
※ This wireless device could get entangled.