User's Manual

30
● Connecting External Devices
When the line-in cable is connected, the player will automatically enter into Record mode and
opens Encode folder.
The user can copy the voice files recorded with the audio cable to external devices such as
cassette tapes and MDs.
● Connecting to an audio device
① When recording to the player from an external source
Connect the audio cable to Line In Input port of the player.
② When recording to an external source from the player
Connect the audio cable to the earphone port of the player and the microphone port or an
input port the external device.
Connecting to an audio device
Notes※
- When connecting the player to an external device, turn off the device first.
- Please read the manual of the external device before connecting the player to an external
device.
- The player does not internally provide power for the external microphone. Therefore, the
user cannot record voice by connecting an external microphone to Line-in port.
● When recording to the player from an external device
When recording from an external device, lower the volume of the source device and connect the
cable to the player before starting recording.
● When recording to an external device from the player
Start recording as soon as turning on the player.
(However, this timing may differ depending on each device. Therefore, we recommend users to
make tests before starting recording.)
When recording, set the volume the player at the mid level and do not change the volume level
during recording.
Connecting External Devices