User's Manual

- 23 -
PC Connection
The user can connect the voice recorder to the PC through the provided USB cable and use the folders of
the voice recorder as a USB driver. (However, in case of Windows 98SE, a separate USB driver is
needed.)
The voice recorder is equipped with the USB mass storage feature and can be used as a hard drive.
The user can connect the voice recorder to the PC in which Windows ME, 2000, or XP, not Windows
98, is installed by plug-and-play method without installing special software.
PC Connection
① Connect the USB cable to the USB port at the side of the voice recorder.
② Connect the other end of the USB cable to the PC.
Windows ME, 200, and XP automatically detects the voice recorder.
Installation of WINDOW 98 SE Driver
① Download Win98 SE driver to C:W of the PC from the web site of Diasonic Technology.
② Double-click on install.bat file under the downloaded directory.
After installation, close the window and reboot the PC.