User's Manual

- 21 -
REP (Reception Method Setting)
The user can play the folders in the same folder in the following ways:
NOR: To play the files once in order.
ONE: To repeat the current file.
ALL: To continue playing all files in order.
SHUFF: To randomly play all files in the folder.
S_SEL (Input Setting)
The user can set the external device through the Line-in port.
Line: To use the MD, cassette, or MP3 player as the sound source.
E-MIC: To select the microphone type – Mono or Stereo.
MO: Mono
ST: Stereo
MIC_S (Microphone Sensitivity Setting)
The user can set the sensitivity of the microphones – Mid or High.
EQ (Equalizer Setting)
The user can set the equalizer mode – NOR (NORMAL), POP,
CLA (CLASSIC), JAZ (JAZZ), LIV (LIVE), ROC (ROCK), or
3D (3D Sound)
.
D_VOL (Reference Volume Setting)
To prevent too high sound upon user’s turning on the voice recorder,
the previous volume is kept for the next playing if it is lower than the
default volume. If the previous volume is higher than the default
volume, the default volume will be used upon user’s turning on the voice recorder.
10~20: Set the default volume.
P_OFF (Automatic Power-off Time Setting)
If the voice recorder is not used for a long time, will be automatically
turned off after a certain time. However, if the user disables
the automatic power-off time, the voice recorder will be always on.
1, 3, 5 MIN: To automatically turn off the voice recorder after 1, 3, o4 5 minutes.
Off: The voice recorder is not automatically turned off.