User's Manual

- 12 -
Voice Recording
With the voice recorder, the user can record conversations and lectures. The recorded files are stored
under Voice folder and the file name format is MIC001_SHQ.MP3. By accessing the PC, the user can
check the files.
① Select the DIR in the Voice menu, and select the folder.
(See the Menu Setup.)
② Select R_QTY in the Voice menu and the recording quality.
(See the Menu Setup.)
③ Press the Recording button. For the first five seconds
after the recording starts, the user cannot stop recording.
Note※
- When the voice recorder is far away from the microphones or sound is low, the recording quality
is poor. Place the sound microphones and the voice recorder close each other.
Recording Data from External Device
Record files from an external source is stored under Line folder, and the file name format is
Line001_SHQ.MP3. By accessing the PC, the user can check the files.
※ Caution
★ To record sound, set the volume of the voice recorder at the middle position. Do not change the
volume during recording. When the volume is set high, noise may occur.
★ Before accessing the voice recorder from an external device, turn off both the voice recorder
and the external device.
★ Before connecting an external device and the voice recorder, read the manual of the device.
수
정해야
함